Must do,s on the t3

new24stroke

Active VIP Member
Joined
Oct 1, 2007
Messages
578
Reaction score
82
Location
Hinton AB.
Hi just purchased a new to me 2015 t3 174. Just a couple things I would like to do. Clutch kit (which one) and doing the billet t-stat. What do you guys suggest
 

kingcat162

Active VIP Member
Joined
Dec 16, 2013
Messages
1,292
Reaction score
1,582
Location
Alberta
Ibackshift kit - powderfreaks thermostat - you have to change the primary spring from what they send you tho - I got a kit from them - told them my whole setup - the spring they sent me was way off (too stiff) for the primary - and their recommendation for pin weight was also way off because their primary spring was too stiff
 
Last edited:

kingcat162

Active VIP Member
Joined
Dec 16, 2013
Messages
1,292
Reaction score
1,582
Location
Alberta
Do the Munster bushing savers - Munster finger throttle - extended glove box with heated liner - drill holes in the windshield and put longer screws in that thread into the inserts underneath so windshield can never come off - t- motion lockout - rear torsion spring spacers - led headlights - cheetah bars - adjustable riser - doo backcountry front bumper - Smith grade rear bumper - I could list more but start with that lol
 

kingcat162

Active VIP Member
Joined
Dec 16, 2013
Messages
1,292
Reaction score
1,582
Location
Alberta
T3 still needs t motion, unless it's boosted
Lots of people lock out the T motion on stockers - easy to lock out and try it - if you don't like it take it out - personally I like it locked out - but yes I am boosted
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,505
Reaction score
16,873
Location
DA Moose B.C
Lots of people lock out the T motion on stockers - easy to lock out and try it - if you don't like it take it out - personally I like it locked out - but yes I am boosted
G4 chassis yes, xm no

Xm needs a bit of lean to initiate
 

1100

Active VIP Member
Joined
Sep 7, 2008
Messages
1,192
Reaction score
1,620
Location
sangudo
The Munster ski bushing things are a must have, couldn’t keep ski rubbers in mine before.
 

Cableguy

Active VIP Member
Joined
Dec 16, 2014
Messages
1,973
Reaction score
4,593
Location
Okanagan
or grippers for skiis
thats the best option
I prefer tmotion locked out and im not boosted
 

Ballzdeep

Active VIP Member
Joined
Oct 12, 2017
Messages
1,967
Reaction score
6,858
Location
St Albert
I don't have a T3 but own a XM FR and love that sled. i put on Powderfreaks T stat and munster brace, ski savers, finger throttle, killswitch. Dyna Joe clutch, not sure what one it is but red springs. Enjoy your new sled, ive heard nothing but positive things about the T3
 

Bnorth

Active VIP Member
Joined
Dec 18, 2010
Messages
10,511
Reaction score
19,966
Location
Salmon Arm
I have a Powderfreaks t-stat and DJ T3 clutching for sale if you're interested. Also a 51t bottom gear helps on the 174.
 

kimrick

RIP Fellow Sledder
Joined
Nov 28, 2009
Messages
2,239
Reaction score
6,335
Location
In Heaven & Revelstoke
Just ride the dam thing and enjoy! They were good right out of the box. Clutching a maybe, depending on how you ride.

I agree!
I still have 2 and have only sucked up the front suspensin strap to keep the nose down.
Found that ski rubbers are really good if you take your time to and from the alpine.

You may want to add extra wheels to the rails to save on sliders if not already done.

Check motor mount bushings for wear and replace if needed. Not hard to do.

Have fun and enjoy the sled. There a very reliable unit.
 

lgallant

Active member
Joined
Nov 19, 2011
Messages
89
Reaction score
213
Location
whitecourt alberta
Love the sled. Hate the skis. They dart like a mutha F. Replaced with Mohawks and these skis work well. No darting and they float way better. Only down side is they are pricey but I have used them on my last two summits. So one more and it will be worth it.
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,505
Reaction score
16,873
Location
DA Moose B.C
Love the sled. Hate the skis. They dart like a mutha F. Replaced with Mohawks and these skis work well. No darting and they float way better. Only down side is they are pricey but I have used them on my last two summits. So one more and it will be worth it.
I also hate the t3 skis, lived with them fir 3 years, said screw it and put grippers on, which are close to the Mohawks
 
Top Bottom