C3 powersports syncodrive belt drive forsale

wideman12

Active VIP Member
Joined
Dec 6, 2012
Messages
187
Reaction score
163
Location
Calgary
Brand new still in box. Never installed.
Will post part number once I pull it out of storage.
Was ordered for 163 t3. Has 2 gear ratios with kit and two belts.
$750
 

bayman

Active VIP Member
Joined
Nov 11, 2008
Messages
913
Reaction score
725
Location
Calgary
Brand new still in box. Never installed.
Will post part number once I pull it out of storage.
Was ordered for 163 t3. Has 2 gear ratios with kit and two belts.
$750

what are the gear ratios you have? I have the 174 but you have peaked my interest.
 

Ballzdeep

Active VIP Member
Joined
Oct 12, 2017
Messages
1,967
Reaction score
6,858
Location
St Albert
I could give you a price on a TKI?

I have a lot of Specialty Motorsports branding going on on my sled, they also service it....id like to stick to C3 and support local...i just cant afford new right now. thanks tho.
 

Teth-Air

Active VIP Member
Joined
Oct 16, 2008
Messages
3,733
Reaction score
7,909
Location
Calgary/Nelson
I have a lot of Specialty Motorsports branding going on on my sled, they also service it....id like to stick to C3 and support local...i just cant afford new right now. thanks tho.
Ask them what continent/country their machining comes from.
 

wideman12

Active VIP Member
Joined
Dec 6, 2012
Messages
187
Reaction score
163
Location
Calgary
IMG_3441.jpg IMG_3443.jpg IMG_3446.jpg

Over $1,100 to buy new!
 

wideman12

Active VIP Member
Joined
Dec 6, 2012
Messages
187
Reaction score
163
Location
Calgary
I’ll get it out tonight and take pics of it all.

I posted some pictures below.
I actually bought it for my 174 as well. I was told the gearing would work no problem, but I ended up selling the sled and getting a 2018 165 which this does not work for.
 

wideman12

Active VIP Member
Joined
Dec 6, 2012
Messages
187
Reaction score
163
Location
Calgary
I have a lot of Specialty Motorsports branding going on on my sled, they also service it....id like to stick to C3 and support local...i just cant afford new right now. thanks tho.


I posted some pictures below.
I actually bought it for my 174 as well. I was told the gearing would work no problem, but I ended up selling the sled and getting a 2018 165 which this does not work for.
 

bayman

Active VIP Member
Joined
Nov 11, 2008
Messages
913
Reaction score
725
Location
Calgary
that is waaaaay higher gearing than I run on my 74. let me talk to some peeps before I commit, if somebody jumps on it, so be it.
 

Teth-Air

Active VIP Member
Joined
Oct 16, 2008
Messages
3,733
Reaction score
7,909
Location
Calgary/Nelson
That is 2.44:1 and the 6 tooth 3.5 pitch driver is only 21" in circumference where the traditional 2.86" driver with 8 teeth is 22.88" circumference, so the resulting compared gearing is 2.444444 / .92 = 2.65:1 which is pretty low. SKi-doo keeps going lower and lower to reduce belt heat but once you get above the center point in the primary sheave you start reducing contact in the secondary. Not an ideal way to deal with the problem in my opinion. Polaris 174 is 2.52:1 and is great.

Or did you say it was a 3" pitch track? I guess you may have 7 tooth driver? I can work that out for you too.

Oh wait 3" x 7" is still 21" circumference.

Chris
 
Last edited:

Bnorth

Active VIP Member
Joined
Dec 18, 2010
Messages
10,510
Reaction score
19,964
Location
Salmon Arm
That is 2.44:1 and the 6 tooth 3.5 pitch driver is only 21" in circumference where the traditional 2.86" driver with 8 teeth is 22.88" circumference, so the resulting compared gearing is 2.444444 / .92 = 2.65:1 which is pretty low. SKi-doo keeps going lower and lower to reduce belt heat but once you get above the center point in the primary sheave you start reducing contact in the secondary. Not an ideal way to deal with the problem in my opinion. Polaris 174 is 2.52:1 and is great.

Or did you say it was a 3" pitch track? I guess you may have 7 tooth driver? I can work that out for you too.

Chris
This for a T3 so 7T 3.00 pitch driver.
 

kanedog

Active VIP Member
Joined
Feb 3, 2015
Messages
3,141
Reaction score
8,615
Location
Kanedog 2015-2019, thanks for the good times S&M!
That is 2.44:1 and the 6 tooth 3.5 pitch driver is only 21" in circumference where the traditional 2.86" driver with 8 teeth is 22.88" circumference, so the resulting compared gearing is 2.444444 / .92 = 2.65:1 which is pretty low. SKi-doo keeps going lower and lower to reduce belt heat but once you get above the center point in the primary sheave you start reducing contact in the secondary. Not an ideal way to deal with the problem in my opinion. Polaris 174 is 2.52:1 and is great.

Or did you say it was a 3" pitch track? I guess you may have 7 tooth driver? I can work that out for you too.

Oh wait 3" x 7" is still 21" circumference.

Chris
I disagree and I can prove it. Haha
 

bayman

Active VIP Member
Joined
Nov 11, 2008
Messages
913
Reaction score
725
Location
Calgary
This for a T3 so 7T 3.00 pitch driver.

Yep, 7 tooth, 3" pitch...if the gearing works out to 2.65 as Chris says I may in fact be interested. I ride primarily with Oler1234 and our gearing is similar to the 2.65 ratio without factoring in the drivers and track pitch and our sleds perform pretty well. Not going to win many races down the trail but lots of grunt. He will see this and chime in hopefully.
 
Top Bottom