C3 powersports syncodrive belt drive forsale

wideman12

Active VIP Member
Joined
Dec 6, 2012
Messages
187
Reaction score
163
Location
Calgary
Yep, 7 tooth, 3" pitch...if the gearing works out to 2.65 as Chris says I may in fact be interested. I ride primarily with Oler1234 and our gearing is similar to the 2.65 ratio without factoring in the drivers and track pitch and our sleds perform pretty well. Not going to win many races down the trail but lots of grunt. He will see this and chime in hopefully.

I’m not going to disagree with you guys. Seems like you know about 10 times as much as I do about these hence I never got around to putting it on.
If anyone is interested feel free to let me know.
 

bayman

Active VIP Member
Joined
Nov 11, 2008
Messages
913
Reaction score
725
Location
Calgary
I’m not going to disagree with you guys. Seems like you know about 10 times as much as I do about these hence I never got around to putting it on.
If anyone is interested feel free to let me know.

sorry to derail your thread! it is a good deal.
 

Specialty Motorsports

Supporting Vendors
Joined
Oct 24, 2017
Messages
33
Reaction score
202
Location
Spruce Grove
Ask them what continent/country their machining comes from.

Teth-Air

You sure seem to like bringing up something you know nothing about. Why don’t you call us and we will tell you the two Edmonton machine shops and the one we use the most in B.C. Funny you don’t bring this up at the sled show in person. Your product is from the US and that’s a good thing?We don’t hang out on here much but I had a minute and searched C3 which you seem to come up on quite a bit. You are in quite a few posts that mention Us vs TKI . You even say you have nothing against us. How does Tom get a belt drive out , snow tested under all conditions on a new model? He must have access to someone we don’t.As Jim on the office would say. ..Not Classy

We have pro riders running our prototypes into the ground before we release. We test them ourselves. ALL of our employees run them and offer feedback on our Canadian designed and built kits. We hunted down the best machinists for our parts. We cover our product as best we can because it’s our own. Designed by a company and group of hill climbers, jumpers, backcountry kooks,grass draggers and trail bombers. Built with pride in detail and quality.
 
Last edited:
Top Bottom