Only dialed in xm TSS centre mount on the planet I bet

kingcat162 · Mar 18, 2019

I have just recently completely dialing in a TSS centre mount kit - I honestly believe I'm the only one on the planet that has successfully done this - prove me wrong

kanedog · Mar 18, 2019

I’ll do a climb or two with you with my na and prove you wrong. Where U wanna meet? Haha

kingcat162 · Mar 18, 2019

Renshaw Tomm - sorry bud but you don't stand a chance honestly

oler1234 · Mar 18, 2019

kingcat162 said:
Renshaw Tomm - sorry bud but you don't stand a chance honestly

whats the stakes?

kingcat162 · Mar 18, 2019

My nicely cooked muffpot meal after one pull - rogies sausage and cabbage rolls

1100 · Mar 18, 2019

What fuel controller you running?

kanedog · Mar 18, 2019

kingcat162 said:
Renshaw Tomm - sorry bud but you don't stand a chance honestly

Muffpot meal is great! If you lose, you will have to start a new thread on here, SW and fb stating "A N/A beat my turbo."Including a picture of your sled.
If I lose, you pick what you want me to do.
Mmmmmmm cabbage rolls!!
I checked your gearing/speed/clutch info. 67mph/107kmh is 1-1 and overdrive is 79/126. If you are not pulling 67mph on a climb then I can beat you. Your belt is only 1/2 to 5/8 up the face of your primary clutch sheave. With this pertinent information, my calculations tell me that I will be receiving a free hot lunch on the mountain.
I pilot a 174 3" Xm. Stock motor, stock pipe.
Congrats on the effort into the tuning. It really is a hard one to tune. You have done a ton of work so don't let my trolling smartassness bring you down.

kingcat162 · Mar 19, 2019

kanedog said:
Muffpot meal is great! If you lose, you will have to start a new thread on here, SW and fb stating "A N/A beat my turbo."Including a picture of your sled.
If I lose, you pick what you want me to do.
Mmmmmmm cabbage rolls!!
I checked your gearing/speed/clutch info. 67mph/107kmh is 1-1 and overdrive is 79/126. If you are not pulling 67mph on a climb then I can beat you. Your belt is only 1/2 to 5/8 up the face of your primary clutch sheave. With this pertinent information, my calculations tell me that I will be receiving a free hot lunch on the mountain.
I pilot a 174 3" Xm. Stock motor, stock pipe.
Congrats on the effort into the tuning. It really is a hard one to tune. You have done a ton of work so don't let my trolling smartassness bring you down.

Ya I wasn't really trying to build a chute master - I geared it down to 2.64 to help with the xm bog - I'm just happy I got it tuned - only took me 3yrs fml

kingcat162 · Mar 19, 2019

1100 said:
What fuel controller you running?

Redline G2 with mainline fuel controller

tex78 · Mar 19, 2019

kanedog said:
Muffpot meal is great! If you lose, you will have to start a new thread on here, SW and fb stating "A N/A beat my turbo."Including a picture of your sled.
If I lose, you pick what you want me to do.
Mmmmmmm cabbage rolls!!
I checked your gearing/speed/clutch info. 67mph/107kmh is 1-1 and overdrive is 79/126. If you are not pulling 67mph on a climb then I can beat you. Your belt is only 1/2 to 5/8 up the face of your primary clutch sheave. With this pertinent information, my calculations tell me that I will be receiving a free hot lunch on the mountain.
I pilot a 174 3" Xm. Stock motor, stock pipe.
Congrats on the effort into the tuning. It really is a hard one to tune. You have done a ton of work so don't let my trolling smartassness bring you down.

Is yours set up for tree riding or climbing??

P. M some good to use info for my t3174 if you would please , I tree ride 90 and climb 10 %
And am not buying new one for a while, so the wife says

kingcat162 · Mar 19, 2019

tex78 said:
Is yours set up for tree riding or climbing??

P. M some good to use info for my t3174 if you would please , I tree ride 90 and climb 10 %
And am not buying new one for a while, so the wife says

I'm the same percentage of riding as you -ive got all the inside info buddy it's takin 3yrs but it is on frickin point right now

1100 · Mar 19, 2019

Kanedog those are some impressive track speed numbers. Pretty much all the xm 163 t3 in our group are low to mid 60s kph at full chew when arking out. I wouldn’t hate some info as well.

1100 · Mar 19, 2019

Also video proof or it didn’t happen!

maxwell · Mar 19, 2019

i have a friend that had his dialed good. Benn through a few engines though so i guess that doesnt count

is it worth it being center mounted for all the hassle? the side mounts work flawless

great to hear. Couldnt wipe the smile off my face once i got my turbo running the way i wanted it

kingcat162 · Mar 19, 2019

When the centre mount is dialed im pretty sure on a dyno the centre mount will pull better numbers than a side mount - mines flawless now it's only taken 30 grand and alot of screaming sweet baby Jesus , I just hit the orange start button and mash it and tape it for 3 min pulls at Renshaw in above zero temps - got so hot tho it melted half of my hood but zero f*cks given

kingcat162 · Mar 19, 2019

I'll try to list off everything I've done to my 174 xm t3 2015 - TSS centre mount - turbo blanket - wrap straight pipe - gonna wrap whole pipe - hood is half gone - snorkel out clutch side - purple/green primary on a dynamo Joe kit 17gram pin weight - gates carbon belt - Shelbourne fuel additive for the win - 8.5 lbs boost 8100rpm - powderfreaks head and tstat housing - Baker rear skid setup - raptors all 4 - cross country front bumper Smith grade in the back - 11" big wheel kit - itech billet idler wheels - tki belt drive 2.64 ratio - my buddy Dave Sebelius was a huge help getting this thing dialed -;the amount of time I have on the phone with him is insane - redline G2 fuel controller with mainline adjustable fuel controller - added 12.5%fuel to the entire redline map that Dave built for TSS - I'm probably forgetting some stuff

kingcat162 · Mar 19, 2019

Not a recent pic I'll take one right now at Renshaw staging

gunner3006 · Mar 19, 2019

kingcat162 said:
When the centre mount is dialed im pretty sure on a dyno the centre mount will pull better numbers than a side mount - mines flawless now it's only taken 30 grand and alot of screaming sweet baby Jesus , I just hit the orange start button and mash it and tape it for 3 min pulls at Renshaw in above zero temps - got so hot tho it melted half of my hood but zero f*cks given

This comment is why I came to this thread. #winning

tex78 · Mar 19, 2019

kingcat162 said:
I'm the same percentage of riding as you -ive got all the inside info buddy it's takin 3yrs but it is on frickin point right now

Mine isn't boosted mind ya

Looking at 872 tho

oler1234 · Mar 19, 2019

tex78 said:
Mine isn't boosted mind ya

Looking at 872 tho

most likely have a used one up for sale in September this year if you don't find anything. Gonna pull the 872 off and do another home built kit.

Only dialed in xm TSS centre mount on the planet I bet

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Similar threads