E start and bumper

AaronQ

Active VIP Member
Joined
Feb 11, 2012
Messages
673
Reaction score
533
Location
Innisfail Alberta
Hey guys have an e start on an old xp with the ptec here that we're getting rid of. Are we able to swap it our and throw it on and 15 xm with the etec?
As well. Front bumpers. Do they cross over? The xp has a little crease in it but I'm thinking I'll pull the factory one off the xm and put on a heavy one and use the xm on the xp.
 

Giver800

Active VIP Member
Joined
Jan 12, 2015
Messages
182
Reaction score
143
Location
Airdrie
The estart will cross over to the xm no problem. The estart I have on my xm is from an xp.

As for the bumpers I'm like 99% sure that they are the same. Best way to find out is to do the swap!
 

AaronQ

Active VIP Member
Joined
Feb 11, 2012
Messages
673
Reaction score
533
Location
Innisfail Alberta
The estart will cross over to the xm no problem. The estart I have on my xm is from an xp.

As for the bumpers I'm like 99% sure that they are the same. Best way to find out is to do the swap!
Thanks. Do you have to swap both the harness or is it plug and play.
Haha Ya I've been postponing that as the procrastination meeting is scheduled for tomorrow......
 

Giver800

Active VIP Member
Joined
Jan 12, 2015
Messages
182
Reaction score
143
Location
Airdrie
You will need to swap the cable that goes from the solenoid to the starter and there is also a jumper wire that goes from the fuse attached to the oil tank over to the positive battery cable where it also attaches to the solenoid.

The only plug and play part is the connector that connectes from the sled harness to the solenoid and that you may have to fish out from in behind the oil tank but it should be there. There is a great YouTube video on installing the estart that I used, I will see if I can find it again.
 

firstdoo

Active VIP Member
Joined
Nov 21, 2013
Messages
721
Reaction score
1,620
Location
Stony Plain
Take your time reading through the instructions thought. XP/XM/XS are all bundled together.
 

Bnorth

Active VIP Member
Joined
Dec 18, 2010
Messages
10,510
Reaction score
19,964
Location
Salmon Arm
The bumpers are the same shape but slightly different profile where they go through the plastic. I believe they are interchangeable.
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,505
Reaction score
16,871
Location
DA Moose B.C
If anyone is looking for a xm e start kit from a 15 xm I know where a kit is

350 ish for the kit

Also have other xm parts for sale too
 
Top Bottom