Bar diameter

AaronQ

Active VIP Member
Joined
Feb 11, 2012
Messages
673
Reaction score
533
Location
Innisfail Alberta
Hey guys what's the diameter of the factory xm bars where they clamp into the riser.
Ive got a bent set on one machine but I think someone swapped it to the sp with the taller riser. This is the spare set of bars I have but it's a different diameter then the adjustable riser I have on the shelf here. These ones measure an inch and a 1/8 Dia.
e227102477b0313e95cfdb8e244cecc5.jpg
 

250mark1

Active VIP Member
Joined
Dec 17, 2007
Messages
1,240
Reaction score
1,349
Location
blackfalds
x bars are 1-1/8" at clamps and as the picture
SP bars are 7/8" at the clamp and are straight ( no dip )
 

AkNomad

Active VIP Member
Joined
Feb 2, 2010
Messages
1,538
Reaction score
1,764
Location
Alaska
250mark1 is spot on, those are X bars in your pic and needs the riser for 1 1/8" bars.
 
Top Bottom