2015 xm T3 spindle bent needs replacing

drew17

Active member
Joined
Mar 11, 2013
Messages
132
Reaction score
93
Location
edmonton, AB
any recommendation on after market or should I just replace with stock parts?
 

1100

Active VIP Member
Joined
Sep 7, 2008
Messages
1,192
Reaction score
1,620
Location
sangudo
I bent one. Also my s mod and a arm. If all you
bent was your spindle, something has to give on an impact. If it was a spindle in your case, there easy to change. I would put another stock one on.
 

Limbo

Active member
Joined
Apr 27, 2009
Messages
121
Reaction score
117
Location
Ft. Mac
Which side spindle do you need, I have a left for sale
 

fredw

Active VIP Member
Joined
Jan 15, 2010
Messages
3,317
Reaction score
3,586
Location
medicine hat
I had bent the left side, but hit a decent rock at the top of a good pull, was not bent much but was bent.. Can't really blame bad parts
 

fredw

Active VIP Member
Joined
Jan 15, 2010
Messages
3,317
Reaction score
3,586
Location
medicine hat
Carbide grabbed it, flew over the hood, but enough speed the sled stayed in place at the top.. Used it ten rides after till it was replaced
 

skegpro

Active VIP Member
Joined
May 11, 2009
Messages
9,930
Reaction score
21,329
Location
In them hills.
Carbide grabbed it, flew over the hood, but enough speed the sled stayed in place at the top.. Used it ten rides after till it was replaced
Haha been there. I dropped the cardbides and run hardwelds now.

A buddy of mine bent a arm trying to get on a deck with fresh carbides.

Not sure why mountain sleds come with them to tell you the truth.
 
Top Bottom