2015 xm 174 T3 800 stator output need help pls

kingcat162 · Oct 8, 2017

Just wondering how I find out how many watts my stator is good for. I'm wondering because I've got an electric water pump and oil pump for the turbo - I put Led headlights in it - but I'm wanting to put a blowhole kit in it and I'm just worried that my stator will melt - also wondering if I have everything running - hand warmers on max, blowhole, water and oil pump, headlights and glovebox heater will it cook the stator or is their a fail safe if you overload it like a fuse or something?

AaronQ · Oct 8, 2017

Glovebox heater. What is his voodoo magic you speak of....

kingcat162 · Oct 8, 2017

AaronQ said:
Glovebox heater. What is his voodoo magic you speak of....

U know - the doo glovebox heated liner

AaronQ · Oct 8, 2017

Do they work alright?

kingcat162 · Oct 8, 2017

AaronQ said:
Do they work alright?

I love it - it defoggs my goggles in 15 mins - it comes with the rca plug in - easy to install - then I added the high rise glove box extension so it fits 2 pairs of goggles

AaronQ · Oct 8, 2017

Ya I have the glove box extension on mine and the gps mount for the brp Garmin handheld that came with dad's side by side it's fricken handy.
Does yours seal fairly well mine gets a bit of snow in it sometimes.

kingcat162 · Oct 10, 2017

AaronQ said:
Ya I have the glove box extension on mine and the gps mount for the brp Garmin handheld that came with dad's side by side it's fricken handy.
Does yours seal fairly well mine gets a bit of snow in it sometimes.

I put a piece of 1/2" think foam stripping like for a patio door along the bottom of it and gorilla glued it on there - bam - sealed lol

kingcat162 · Oct 11, 2017

ANYONE OUT THERE - does anyone know how many watts the 2015 etech 800 stator is good for? I've had such bad luck with crappy dealerships being clueless don't know who to call or how to find this info - pls help someone anyone ???????

AaronQ · Oct 11, 2017

kingcat162 said:
ANYONE OUT THERE - does anyone know how many watts the 2015 etech 800 stator is good for? I've had such bad luck with crappy dealerships being clueless don't know who to call or how to find this info - pls help someone anyone ???????

No idea. But I do know that if you seal your glovebox up with gorilla foam and tape and put the heater in there it'll dry your goggles off...lol sorry I couldn't resist.
Find a 12v power source and get a amp clamp multimeter and see how much draw is coming through the stator with everything on

kovs · Oct 11, 2017

I want to say they are 360watt think they upgraded them to that when etec came along I could be wrong tho

tex78 · Oct 11, 2017

I also seem to recall the 360 Watt

I google searched but didn't really find sh!t

BeachSled · Oct 11, 2017

This is from a 2014 service manual, so i would hope the '15s are the same. Hope this is what your looking for.

kingcat162 · Oct 11, 2017

BeachSled said:
This is from a 2014 service manual, so i would hope the '15s are the same. Hope this is what your looking for.

so does that mean that it will put out a max of 1340 watts @ 6000rpm before something gets nuked - i wonder if it would just blow the 25 amp main fuse or if it would destroy the stator?

SUMMIT TREE · Nov 8, 2017

Ok reading my manual which I just picked up and is the most current as far as I know. To give you the jist of how I understand it is this
Th ECM Has total control of the stator and priority is to maintain 60VDC to operate crucial operating systems ie: the ignition
Below 2000 Rpm current is limited to be able to maintain that 60vdc as stator output is Rpm dependent
Above 2000 Rpm it has a maximum of 25A avilable again in an attempt to keep the vital 60Vdc

so in answer to your question I would say no, you wont melt down your stator, but all you have is a max of 25 amps total. At worst you might pop your 25A main fuse. Which looking at this basic schematic they give kinda looks like it just wont charge the battery if that pops. Hope that helps.

ferniesnow · Nov 9, 2017

kingcat162 said:
ANYONE OUT THERE - does anyone know how many watts the 2015 etech 800 stator is good for? I've had such bad luck with crappy dealerships being clueless don't know who to call or how to find this info - pls help someone anyone ???????

I have a lot of respect for Jason Williams (service manager) at Bow Ridge in Cochrane. They are quite busy this time of year but give him a call and ask him the question: 403-932-2019

2015 xm 174 T3 800 stator output need help pls

kingcat162

Active VIP Member

AaronQ

Active VIP Member

kingcat162

Active VIP Member

AaronQ

Active VIP Member

kingcat162

Active VIP Member

AaronQ

Active VIP Member

kingcat162

Active VIP Member

kingcat162

Active VIP Member

AaronQ

Active VIP Member

kovs

Active VIP Member

tex78

Active VIP Member

BeachSled

Active VIP Member

Attachments

kingcat162

Active VIP Member

SUMMIT TREE

Active VIP Member

ferniesnow

I'm doo-ing it!