Xm piston replace

revbyu · Oct 6, 2017

well I made a bit of a stirup at one of the dealers in alberta and told them that I wanted to see BRPs specs and wanted it on the work order that 5 thou was there limited - needless to stay no long after - engine was done under warranty

CUSO · Oct 9, 2017

Back to the main topic...

Is there an aftermarket recommended piston, or should I just run stockers? I am nearing 5000km also and it's time.

sledn · Oct 9, 2017

CUSO said:
Back to the main topic...

Is there an aftermarket recommended piston, or should I just run stockers? I am nearing 5000km also and it's time.

Wossner Pistons---Tom at Mots Machining Edmonton

CUSO · Oct 9, 2017

Thanks Steve. I think you are right after some reading. I will get him to bring some to the sled show.

sledn said:
Wossner Pistons---Tom at Mots Machining Edmonton

slededjr · Oct 9, 2017

Wossner are great. Allow proper warm up and &#55357;&#56396;

Giver800 · Oct 9, 2017

I also put wossners in my 13 xm last year. Only put on about 300km last year but they were great no issues or complaints. I also had the dealer reset break in as extra precaution as well.

tex78 · Oct 9, 2017

I've used the mcb 2 rings on 800r ptec and works better than the stockers, no heat fade at all

Xm piston replace

revbyu

Active VIP Member

CUSO

Active VIP Member

sledn

Active VIP Member

CUSO

Active VIP Member

slededjr

Active VIP Member

Giver800

Active VIP Member

tex78

Active VIP Member

Similar threads