bdt92
Member
Hey guys I'm thinking about putting a 3" track under my 2014 sp, I've heard that they will rub? What will I need to do this conversion?
Considering a 3" track conversion
- Thread starter bdt92
- Start date
Bnorth
Active VIP Member
3" pitch track and t3 drivers. When I did mine it was cheaper to get the t3 driveshaft and drivers than get the avids and have them pressed. Play with clutching and gearing after you're done.
Sent from my SM-G925W8 using Tapatalk
Sent from my SM-G925W8 using Tapatalk
handyandy
Active VIP Member
Not worth the cost in my opinion. In the end you can buy a year or two old t3 for reasonable price and save all the work.
kovs
Active VIP Member
If your going to do that I'd also do the t3 skid relocate kit from sled head racing.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
mur190
Active VIP Member
Did my 14 freeride a couple years ago, great mod, prob some of the best money I spent!
cost for me was right around 2200. The SHR skid relocate helps a bunch. With the used xm market gone to **** and our sleds worth next to nothing this is a heathy upgrade that will keep the skis in the air and all our G4 buds within reach.
cost for me was right around 2200. The SHR skid relocate helps a bunch. With the used xm market gone to **** and our sleds worth next to nothing this is a heathy upgrade that will keep the skis in the air and all our G4 buds within reach.
gofast89
Active member
