Rooster kit

procat801

Active member
Joined
Nov 3, 2012
Messages
32
Reaction score
4
Location
fort mac
What is the best kit for Revy and valemount Does anybody know if the kit come with secondary helix or us it just primary
 

MoThEr TrUcKeR

Active VIP Member
Joined
Oct 13, 2011
Messages
363
Reaction score
232
Location
Alberta
Roosterbuilt comes with secondary and primary springs helix and adjustable pin kit
 

Deano670

Active VIP Member
Joined
Oct 10, 2007
Messages
1,905
Reaction score
831
Location
Beaumont
Our spi kit comes with prim/sec springs, ramps,helix and adjustable pins. 350.00cdn we also install a primary shim kit to get your moveable sheave to belt clearance down to .010-.015" where it should be not the .050-.100" they are from factory. This helps by providing a positive engagement as well being the sheaves start closer together they finish closer together= more track speed and improved hp and torque transfer to the ground. Then top it off with some taller gearing. You will run clicker 3-4 in the hills and clicker 1-2 at lower elevations. PM me or call the shop 780 986 6370 for any questions you have

Thank you

Deano
 

Caper11

Active VIP Member
Joined
Oct 28, 2007
Messages
9,483
Reaction score
18,413
Location
Edson,Alberta
Stock clutching is ok but is still lacking in a lot of areas. Lower gearing is a bandaid.


Sent from my iPad using Tapatalk
 

Darren400

Active member
Joined
Apr 20, 2012
Messages
69
Reaction score
45
Location
B.c
Rooster built kit is great! Paul and David run what they sell. You won't be dissatisfied.
 

Deano670

Active VIP Member
Joined
Oct 10, 2007
Messages
1,905
Reaction score
831
Location
Beaumont
Let me put it this way with stock clutching the only way to pull and maintain your rpm is to run a low gear ratio, with our kits you will be on the rev limiter all day long with stock gear ratio. If you are able to pull taller gears with clutching changes you are using your engines power much more efficiently.

Deano
 

rotormech

Active VIP Member
Joined
Dec 18, 2007
Messages
685
Reaction score
286
Location
grande prairie
Thanks,that makes a lot of sense,so you could go up a gear on a 14 xm?would that give you more track speed to then.
 

LennyR

Active VIP Member
Joined
Jun 13, 2009
Messages
3,327
Reaction score
13,982
Location
alberta
No don't waste your money. Factory clutching is just fine


Sent from my iPhone using Tapatalk -

Some of these guys are gonna go above the meadows and cabin at Allen Creek. They are crazy man, but the stock clutching and groovy stickers should be good enough for you.
These guys are so dumb, they even leave their snoflap on, crazy I say, but they're not real mountain riders......... Like you. LOL.
 

maxwell

Active VIP Member
Joined
Apr 25, 2007
Messages
19,836
Reaction score
41,655
Location
Sherwood Park, Alberta, Canada
Some of these guys are gonna go above the meadows and cabin at Allen Creek. They are crazy man, but the stock clutching and groovy stickers should be good enough for you.
These guys are so dumb, they even leave their snoflap on, crazy I say, but they're not real mountain riders......... Like you. LOL.

I've seen more gains from removing my snow flap than I've ever had from any clutch kit. I used to play the mod game big time. Ps. The best snow is not far from Allan creek cabin. Although you may not have the skills to get there. That's ok you have a clutch kit lmao.


Sent from my iPhone using Tapatalk -
 
Top Bottom