XIC controller help

RyanAME

New member
Joined
Aug 6, 2019
Messages
2
Reaction score
0
Location
Cold Lake
I’m running an XIC controller on a 14 xm 163 but had a screen failure so I sent my box into SDS for repair. He replaced the screen but I’m not sure he gave me the same box back. I have only adjusted the main fuel to 130 and the boost % up and down a bit but concerned about all the other setting and don’t want to run it until I get some numbers from some of you guys. He gave me a print off of what was currently setup and for starters the main fuel is way low at 70. Please help
 

mountainsledmania

Active VIP Member
Joined
Dec 28, 2009
Messages
1,187
Reaction score
1,231
Location
sherwoodpark
I’m running an XIC controller on a 14 xm 163 but had a screen failure so I sent my box into SDS for repair. He replaced the screen but I’m not sure he gave me the same box back. I have only adjusted the main fuel to 130 and the boost % up and down a bit but concerned about all the other setting and don’t want to run it until I get some numbers from some of you guys. He gave me a print off of what was currently setup and for starters the main fuel is way low at 70. Please help
I have the latest settings for both inter cooled and non inter cooled set up's. Send me a PM and well figure out a way to get it to you.
 
Top Bottom