2017 Ski Doo 850 Silber Question

kxfrider

New member
Joined
Nov 23, 2018
Messages
4
Reaction score
4
Location
Missoula
I had a silber kit installed on my 850 and with the new helix that cam with the kit from silber.I don't have anymore threads left to adjust my belt lower for proper belt deflection. It sits a little to high but I cant adjust anymore. Any ideas thanks
 

pfi572

Active VIP Member
Joined
Mar 10, 2010
Messages
6,063
Reaction score
15,236
Location
Grande Prairie
The adjuster is installed all the way into the helix center ?
Sounds like it’s not as you tighten to drop belt deflection .
 

kxfrider

New member
Joined
Nov 23, 2018
Messages
4
Reaction score
4
Location
Missoula
Yes adjuster is all the way in. No more threads left to adjust in to drop belt to where it needs to be.
 

MK4TDI

Active VIP Member
Joined
Dec 5, 2010
Messages
3,832
Reaction score
15,971
Location
Saskatchatoon
Yes adjuster is all the way in. No more threads left to adjust in to drop belt to where it needs to be.
Do you have the belt deflection collar on correctly? I believe the threads are offset to the outside of the shaft. There should be 1/4" ish of that collar that doesnt have threads on it, and that side of the collar goes to the inside.
 

kxfrider

New member
Joined
Nov 23, 2018
Messages
4
Reaction score
4
Location
Missoula
I will take a look I didn’t think to look at the collar thank you!
 
Top Bottom