TSS Turbo 2014 XM

The Kickass One

Active VIP Member
Joined
Jan 13, 2009
Messages
1,414
Reaction score
5,554
Location
Out There
Anyone have any knowledge of TSS turbos.

Found a three hose connection above oil reservoir. 2 connections were un hooked and the other looks to be cut off.... looks like air/turbo pressure. If I knew how to post a photo from an Iphone i would.
 

maierch

Active VIP Member
Joined
Oct 26, 2008
Messages
1,565
Reaction score
2,512
Location
Calgary
Depending on the age of the kit it could be the boost line that goes to the XIC and tees off to go to a boost gauge back when they used to strap the XIC to the handle bars.

Otherwise both fuel pressure and return tee off above the reservoir.
 

mountainsledmania

Active VIP Member
Joined
Dec 28, 2009
Messages
1,187
Reaction score
1,231
Location
sherwoodpark
there is very limited places that boost reference goes to. usually comes from throttle bodies, and goes to control box, boost gauge, blow off valve, and watse gate actuator
 

oler1234

Active VIP Member
Joined
Nov 20, 2008
Messages
3,592
Reaction score
5,976
Location
Calgary, AB & Golden, BC
Boost reference line off the throttle bodies to the wastegate sounds like turbo surge waiting to happen.

you should have a boost reference line that comes off the compressor cover to the wastegate.
 

Justinvr81

Active VIP Member
Joined
Jan 18, 2014
Messages
229
Reaction score
697
Location
Tumbler Ridge,BC
Why can we not post from a Iphone to here??

So fauckin frustrating!!

Just press the picture symbol beside the camera , it’s really easy if you have Tapatalk
7989c67d0e943612bd834f2667505f24.png
 
Last edited:

Bnorth

Active VIP Member
Joined
Dec 18, 2010
Messages
10,510
Reaction score
19,964
Location
Salmon Arm

The Kickass One

Active VIP Member
Joined
Jan 13, 2009
Messages
1,414
Reaction score
5,554
Location
Out There
I can’t find a third hose line anywhere. Any chance anyone with a TSS side mount turbo can look at their setup to see if and where a 3rd hose goes?
 

The Kickass One

Active VIP Member
Joined
Jan 13, 2009
Messages
1,414
Reaction score
5,554
Location
Out There
One hose goes to actuator the other hose goes to boost and maybe that other hose just goes to athmosphere.

There is a hose from throttle bodies to XIC box.
 

Bnorth

Active VIP Member
Joined
Dec 18, 2010
Messages
10,510
Reaction score
19,964
Location
Salmon Arm
One hose goes to actuator the other hose goes to boost and maybe that other hose just goes to athmosphere.

There is a hose from throttle bodies to XIC box.
a 3 port mac valve for boost control wants to see vacuum so it likely came off the intake between the throttle bodies and the reeds.
 
Top Bottom