Who premixes oil in there turbo 800etec?

venom

Active VIP Member
Joined
Aug 27, 2008
Messages
214
Reaction score
246
Location
ft mac,AB
Who premixes oil in there turbo etec and how much? (Stock oil injection still functional).
I'm not new to turbo's but certainly a brp virgin. Been away from sledding for a few years but just picked up a 15 turbo xm. The sled has a BD tial/intercooler kit that I'll b running at 6-8lbs on straight AV gas. Im planning premixing for some extra insurance, but haven't decided at what ratio yet.
I know there will b those that say don't do it there's no need, but go ahead voice your opinion. I'm trying to gather info on the folks that are premixing and at what ratio. I'll b premixing with the new xps x2-rs racing oil. Any info is greatly appreciated!
Merry Christmas and a happy New Year!
 
Last edited:

mountainsledmania

Active VIP Member
Joined
Dec 28, 2009
Messages
1,187
Reaction score
1,231
Location
sherwoodpark
Who premixes oil in there turbo etec and how much? I'm not new to turbo's but certainly a brp virgin. Been away from sledding for a few years but just picked up a 15 turbo xm. The sled has a BD tial/intercooler kit that I'll b running at 6-8lbs on straight AV gas. Im planning premixing for some extra insurance, but haven't decided at what ratio yet.
I know there will b those that say don't do it there's no need, but go ahead voice your opinion. I'm trying to gather info on the folks that are premixing and at what ratio. I'll b premixing with the new xps x2-rs racing oil. Any info is greatly appreciated!

I do, i run 50/1 for oil in the fuel. seems like alot but you cant really tell. doesnt smoke hardly at all. and id rather be over oiled then under, plus you dont want to wash the oil off the intake side of your pistons. oil is your friend.
 

venom

Active VIP Member
Joined
Aug 27, 2008
Messages
214
Reaction score
246
Location
ft mac,AB
How many miles do u have boosted? Thanks fo the info!
 

mountainsledmania

Active VIP Member
Joined
Dec 28, 2009
Messages
1,187
Reaction score
1,231
Location
sherwoodpark
How many miles do u have boosted? Thanks fo the info!
so far, this is my first season so not many with boost. But i did alot of research and talked to alot of peeps with them what the general consensus was min 50/1. there are some guys on here with BIG kms boosted running 50/1 and even 40/1
 

sick1

Active VIP Member
Joined
Oct 25, 2009
Messages
419
Reaction score
416
Location
Spruce Grove
I ran for 4 years and 8000+km at 8lbs with my snow to air aerocharger kit in my 13. finally rebuilt due to crank run out, pistons were like new still. 40 to 1 in the fuel and turned up oil pump. i will be doing the same on my 850 when i put my aero kit on it. no snow to air this time be 5lbs non intercooled to start.
 

venom

Active VIP Member
Joined
Aug 27, 2008
Messages
214
Reaction score
246
Location
ft mac,AB
I ran for 4 years and 8000+km at 8lbs with my snow to air aerocharger kit in my 13. finally rebuilt due to crank run out, pistons were like new still. 40 to 1 in the fuel and turned up oil pump. i will be doing the same on my 850 when i put my aero kit on it. no snow to air this time be 5lbs non intercooled to start.
8K boosted, I'll take that. Thanks
 

sick1

Active VIP Member
Joined
Oct 25, 2009
Messages
419
Reaction score
416
Location
Spruce Grove
Ya it was a good run.. hoping to get good mileage out of my new one.
 

ktmsx350f

Active VIP Member
Joined
Nov 9, 2014
Messages
587
Reaction score
514
Location
fort mcmurray
Etec have 2 issues with turbos oiling and crank run out. Piling for the rods is only on one side and nothing at the top. Cranks go out of phase on stock engines so turbos even more so. That’s why I removed my stock engine and put in an upgraded one with pinned crank and better rods that oil both sides and on top along with being stronger. Adding oil to the fuel doesn’t help anything in these situations. In an etec fuel is sprayed directly on top of the piston so if anything all you are doing is making a little tiny bit more build up on top. It probably won’t hurt anything or foul a plug (I’ve been told guys have fouls plus mixing but never seen it first hand) but it’s not helping or lubricatinf the sides in any way. If you want your best option is to have it hooked up to buds and turn the oiling up using the buds system
 

venom

Active VIP Member
Joined
Aug 27, 2008
Messages
214
Reaction score
246
Location
ft mac,AB
I'll probably get the oil pump turned up for what it's worth. With aux boost injectors in intake i cant see extra oil doing any harm. I've been researching pistons, rods and cranks. Where did u get your engine built? What material did u go With?
 

ktmsx350f

Active VIP Member
Joined
Nov 9, 2014
Messages
587
Reaction score
514
Location
fort mcmurray
Tom at most is your best bet. Pinned crank, woosner rods and pistons. Crank runout is checks and he will give a 1 year warranty even with boost for about 2200. Can’t beat the price or quality
 

venom

Active VIP Member
Joined
Aug 27, 2008
Messages
214
Reaction score
246
Location
ft mac,AB
Tom at most is your best bet. Pinned crank, woosner rods and pistons. Crank runout is checks and he will give a 1 year warranty even with boost for about 2200. Can’t beat the price or quality[/QUO

wasn't picking up what u were laying down at first, until I realized it was supposed to b mots...Lol. I Was checking out there website a couple days ago. Next time I'm in edm I'd like to stop by. U must b the one with the engine for sale.
Thanks
 

pfi572

Active VIP Member
Joined
Mar 10, 2010
Messages
6,063
Reaction score
15,236
Location
Grande Prairie
$2200.00 and he rebuilds yours or $2200.00 exchange if your motor isn’t blown up?
I have a complete motor that isn’t blown up but run out is getting to much is the reason I ask?
Thanks
 

venom

Active VIP Member
Joined
Aug 27, 2008
Messages
214
Reaction score
246
Location
ft mac,AB
$2200.00 and he rebuilds yours or $2200.00 exchange if your motor isn’t blown up?
I have a complete motor that isn’t blown up but run out is getting to much is the reason I ask?
Thanks

I talked to mots today. roughly $2100 and they'll do a crank/pistons and rods. They deal with cvtech and do custom work also. If u just want a crank, bring them yours and get them to make you whatever u want.
 

maxwell

Active VIP Member
Joined
Apr 25, 2007
Messages
19,835
Reaction score
41,645
Location
Sherwood Park, Alberta, Canada
Etec have 2 issues with turbos oiling and crank run out. Piling for the rods is only on one side and nothing at the top. Cranks go out of phase on stock engines so turbos even more so. That’s why I removed my stock engine and put in an upgraded one with pinned crank and better rods that oil both sides and on top along with being stronger. Adding oil to the fuel doesn’t help anything in these situations. In an etec fuel is sprayed directly on top of the piston so if anything all you are doing is making a little tiny bit more build up on top. It probably won’t hurt anything or foul a plug (I’ve been told guys have fouls plus mixing but never seen it first hand) but it’s not helping or lubricatinf the sides in any way. If you want your best option is to have it hooked up to buds and turn the oiling up using the buds system


what about the fuel coming in the airbox through the boost injectors?
 

sick1

Active VIP Member
Joined
Oct 25, 2009
Messages
419
Reaction score
416
Location
Spruce Grove
and to help rod bearings and reed life also.
 
Last edited:

bayman

Active VIP Member
Joined
Nov 11, 2008
Messages
913
Reaction score
725
Location
Calgary
I turned up my oil pump 2 numbers after talking with sick1 in October. I see no ill effects in riding performance. I am running straight av gas at 7lbs. My riding partner also turned his oil pump up 2. He burned his motor down after a severe lean condition(setting his own fuel map with stock injectors) and when it came apart there was a lot of oil on everything...he has since got back to one number more than stock for oiling.
 

ktmsx350f

Active VIP Member
Joined
Nov 9, 2014
Messages
587
Reaction score
514
Location
fort mcmurray
what about the fuel coming in the airbox through the boost injectors?

I’ve yet to see a etec turbo that had an issue from not having enough oil for pistons. It’s allways crank and rods in my experience but yes you are correct if that’s what your after. Like I said the issues are crank and rods and just adding little fuel in the oil doesn’t help that IMO by the time you have enough in the oil it’s to much for drivability. I’ve had a few customers try it and fouled plugs at 50:1 and then tried per mix instead of injection oil was a little better but still fouled plugs and groggy in the bottom/mid range
 
Top Bottom