How many km/miles turbo'd

zenk

Active VIP Member
Joined
Nov 18, 2010
Messages
315
Reaction score
223
Location
red deer
I'm pretty sure it was powder freaks that was doing the heads for boost it's pump gas xm kit.

i believe this is where i heard about doing the head work.
 

Shaggy1421

Active member
Joined
Nov 28, 2013
Messages
26
Reaction score
8
Location
Grande Prairie
I have a 15 skidoo 174" boondocker turbo. Linderman head. 7lbs boost straight av. 3200km no problems other than some heat and rubbing from intake on fuel lines. That being said I pull the hood off my sled after every 5 day trip and check. If your not into a little do it yourself turbo is probably not for you. I love mine couldn't see myself running a stocker again. I was the first in my group with a turbo and this year my whole crew is trying them out. More money = More power = More fun. Roll out the wallet and have more fun lol
 

zenk

Active VIP Member
Joined
Nov 18, 2010
Messages
315
Reaction score
223
Location
red deer
I have a 15 skidoo 174" boondocker turbo. Linderman head. 7lbs boost straight av. 3200km no problems other than some heat and rubbing from intake on fuel lines. That being said I pull the hood off my sled after every 5 day trip and check. If your not into a little do it yourself turbo is probably not for you. I love mine couldn't see myself running a stocker again. I was the first in my group with a turbo and this year my whole crew is trying them out. More money = More power = More fun. Roll out the wallet and have more fun lol

running boondockers fuel programmer?
 

fredw

Active VIP Member
Joined
Jan 15, 2010
Messages
3,317
Reaction score
3,586
Location
medicine hat
Ran a few turbo 800 over the years, my aerochargers have ran good at lower boost levels, lost a few motors when boost levels above 7lbs, it seams rods just can't last above that..

Bought a more exspensive impulse kit a few years back and never touched motor to this point so far with now 2500 hard miles on it, this kit I have been pushing up to 10lbs so far and rods have been good, but I am always nervous about them popping, I have a Linderman built rod motor ready to go the day it happens and I might swap out sooner, we will see.. As for any other problems with impulse kit it's been pretty decent but Did loose a turbo last year when a fuse Poped and lost oil pump..

i have tried to run a 872 with a aftermarket xrod, but they never made it two days and broke, we are hopping lindermans rods are the answer

power of a good running two stroke is a great feeling, but you need to keep maintence up and be prepared to troubleshoot problems, because their will be. And be prepared for possible engine carnage..
 
Top Bottom