Silbers 850 turbo kit could be the answer..

turboetech

Active VIP Member
Joined
Nov 8, 2011
Messages
901
Reaction score
1,358
Location
Alberta
Talked to Ken at MM the other day 2800$$$ for the set up ooooouuuuch......p85 and team secondary
 
Last edited:

turboetech

Active VIP Member
Joined
Nov 8, 2011
Messages
901
Reaction score
1,358
Location
Alberta
Has anyone tried running the oil line feed to the turbo from the back side instead of looping it out the front? Silber 850 install
 

venom

Active VIP Member
Joined
Aug 27, 2008
Messages
214
Reaction score
246
Location
ft mac,AB
Has anyone tried running the oil line feed to the turbo from the back side instead of looping it out the front? Silber 850 install
I thought about doing that but decided not to at the end. I clamped the oil line to the top of the bulkhead utilizing the factory ground lug. Just gives it a little more support under the turbo.
 

turboetech

Active VIP Member
Joined
Nov 8, 2011
Messages
901
Reaction score
1,358
Location
Alberta
And how about the coolant line routing? From turbo to coolant jug... return line No real info or pics on that either did you heat tape/shield it?.
 

venom

Active VIP Member
Joined
Aug 27, 2008
Messages
214
Reaction score
246
Location
ft mac,AB
Ready to go!
f5c5d9748c0c84c7d7266f80f88c5e75.jpg
0dcf80d44fff864b4eafe52ed5450862.jpg
9dff6952b51dde86c1382a128c716986.jpg
 

venom

Active VIP Member
Joined
Aug 27, 2008
Messages
214
Reaction score
246
Location
ft mac,AB
And how about the coolant line routing? From turbo to coolant jug... return line No real info or pics on that either did you heat tape/shield it?.
I didnt take any close ups of it. But I posted a pic where u can c the coolant lines.
 

Dmf

Active VIP Member
Joined
Oct 17, 2010
Messages
371
Reaction score
398
Location
Grande Prairie
All kits coming ceramic coded or your ordered it that way?
running stock reeds?
 

turboetech

Active VIP Member
Joined
Nov 8, 2011
Messages
901
Reaction score
1,358
Location
Alberta
Thx Vemon hard to seen exact routing.... but I got mine ready for pow just put a bit of heat reflecting tape on that coolant line and that heat shield on hood that’s over the exhaust/turbo area..... I also put some vents in the side panels hoping to evac all that heat the turbo will make
 

turboetech

Active VIP Member
Joined
Nov 8, 2011
Messages
901
Reaction score
1,358
Location
Alberta
I am also thinkin about cutting tha plastic guard/shield off the clutch cover I did on all my Xm and Xp doos.... mine is a 2018 and with panel vents and plastic cover removed should help clutch temp.... this sleds not a belt burner and hope by installing this silber kit it stays that way.....
 

venom

Active VIP Member
Joined
Aug 27, 2008
Messages
214
Reaction score
246
Location
ft mac,AB
I'll get rid of that plastic as well if it becomes an issue. I'm considering a blowhole install on the turbo side. Fab work required I'm sure, we'll c.
 

venom

Active VIP Member
Joined
Aug 27, 2008
Messages
214
Reaction score
246
Location
ft mac,AB
Well first ride on the 2019 silber 850 in the books. Not much snow but enough for a couple test runs. Not real happy at this point. Clutching is an issue for sure. Wouldn't pull rpm, 7200 rpm max. Couldn't believe how hot they were for basically a little trail riding. This was a low elevation 2500ft so was taking it pretty easy. More testing required!
c46b501d3d44530207cdcf8168765b00.jpg
37e110822f96bce05fc0208f4c507d80.jpg
 

Caper11

Active VIP Member
Joined
Oct 28, 2007
Messages
9,483
Reaction score
18,413
Location
Edson,Alberta
Well first ride on the 2019 silber 850 in the books. Not much snow but enough for a couple test runs. Not real happy at this point. Clutching is an issue for sure. Wouldn't pull rpm, 7200 rpm max. Couldn't believe how hot they were for basically a little trail riding. This was a low elevation 2500ft so was taking it pretty easy. More testing required!//uploads.tapatalk-cdn.com/20181115/c46b501d3d44530207cdcf8168765b00.jpg//uploads.tapatalk-cdn.com/20181115/37e110822f96bce05fc0208f4c507d80.jpg

What clutching is the silber running???
 
Top Bottom