Silbers 850 turbo kit could be the answer..

Director

Active VIP Member
Joined
Oct 11, 2012
Messages
400
Reaction score
497
Location
RockyView
Sounds like you need a clutch/motor mount alignment way cheaper than keep buyin belts at 220$ a pop

Yea i got them to check, said it was good.. I inquired about that grip n rip tool so check that out... i blew 1 in the first 100km so was concerned, been over 400km since so seems alright.
 

Director

Active VIP Member
Joined
Oct 11, 2012
Messages
400
Reaction score
497
Location
RockyView
Spent the weekend in Revy riding the guts out of the 850 Silber.. Let that animal out of the cage, i've got to build up so new turbo muscles i suppose..

Sled runs awesome, i still have to do a bit of clutching to get it totally dialled in.. I geared up a tooth and thru some weight at the clutches.. Went a little heavy on the tip and now its heavy till it spools up and then look out.. Think if i pull that weight back it'll be a little more controlled and snappy... Its so awesome, I'll chase it just a little closer and leave it..

Sled runs without a hiccup and is out of control powerful, so much fun and i was able to setup my skid and it's hard to make it wheelie..
 

kxfrider

New member
Joined
Nov 23, 2018
Messages
4
Reaction score
4
Location
Missoula
Anybody else having trouble getting rpms down with what they supply you for clutching with the kit. I have loaded as much weight as I can on the p drive bolts and still can’t keep my rrs below 8200. Suggestions? Riding a 17 ski doo 850 and SILBER kit and SILBER helix and clutch weights. Ride 6000 ft.
 

captain extreme

Active VIP Member
Joined
Apr 2, 2007
Messages
274
Reaction score
429
Location
Calgary
Who are all the options in Alberta for programming? Do you just need the cable or do you have to purchase the program too?
I received a quote from a certain dealer North of Edmonton, was not to pleasant to chat to the phone about kits and then got quoted well north of $700 just for them to install silbers programming, I just about fell off my chair!
700$ beans to plug into my sled! crazy! Maybe I am missing something?
 

NeilV

Active VIP Member
Joined
Jan 4, 2009
Messages
203
Reaction score
470
Location
Busby Alberta
Anybody else having trouble getting rpms down with what they supply you for clutching with the kit. I have loaded as much weight as I can on the p drive bolts and still can’t keep my rrs below 8200. Suggestions? Riding a 17 ski doo 850 and SILBER kit and SILBER helix and clutch weights. Ride 6000 ft.

Yes everyone I know with this kit has had the same problem. Just swapped out the stock pin bolt for a longer one. Bolt weights more and can fit more spacers.
 

NeilV

Active VIP Member
Joined
Jan 4, 2009
Messages
203
Reaction score
470
Location
Busby Alberta
Who are all the options in Alberta for programming? Do you just need the cable or do you have to purchase the program too?
I received a quote from a certain dealer North of Edmonton, was not to pleasant to chat to the phone about kits and then got quoted well north of $700 just for them to install silbers programming, I just about fell off my chair!
700$ beans to plug into my sled! crazy! Maybe I am missing something?

If you bought a new kit from silber that should all be included. If it's a second hand kit they charge 500usd for the programming. You could buy the reflash cable for another 300 but you would still have to pay the 500 for the flash. You could just do it at home then.
 

turboetech

Active VIP Member
Joined
Nov 8, 2011
Messages
901
Reaction score
1,358
Location
Alberta
Silber flashed mine at Edmonton sled show took about 1 minute and all included in purchase.... as for clutching SHR 967a turbo weights... 450$ in stock at wpm... pay to play not a cheap sport
 

mountainsledmania

Active VIP Member
Joined
Dec 28, 2009
Messages
1,187
Reaction score
1,231
Location
sherwoodpark
Who are all the options in Alberta for programming? Do you just need the cable or do you have to purchase the program too?
I received a quote from a certain dealer North of Edmonton, was not to pleasant to chat to the phone about kits and then got quoted well north of $700 just for them to install silbers programming, I just about fell off my chair!
700$ beans to plug into my sled! crazy! Maybe I am missing something?

That rite there is rape, theres no reason for that. One of the reasons i wont buy a ball cap from that certain dealer north of Edmonton
 

turboetech

Active VIP Member
Joined
Nov 8, 2011
Messages
901
Reaction score
1,358
Location
Alberta
Lol...they gave me 2 caps and a hoody when I bought my silber kit at their booth at sled show guess it makes a difference if you support them or only lookin for free info...... they treat me well.... even wanted to install my turbo for free but I did it myself
 

turboetech

Active VIP Member
Joined
Nov 8, 2011
Messages
901
Reaction score
1,358
Location
Alberta
I agree 700$ is insane to dump a program.... wondering if silber has an upgraded flash.... hope that’s not 700$$.... holy crap
 

snopro

Active VIP Member
Joined
Mar 3, 2009
Messages
101,144
Reaction score
89,302
Location
Milo,Alberta
Wow! When I ran Boost It turbo's I would run into Neil on the hill at times and he would just walk over to my sled without saying a word and open up my panel and change parameters on the box if he found anything new that improved the performance....at no charge. That's what I expect from someone I spent a bunch of money with. Not paying through the nose to make a poor product better on my wallet.
 

turboetech

Active VIP Member
Joined
Nov 8, 2011
Messages
901
Reaction score
1,358
Location
Alberta
I’m sure every individual has their own experiences..... mine with boost it where not good....everytime I have texted Justin or Corey with silber they have replied right away....
 

venom

Active VIP Member
Joined
Aug 27, 2008
Messages
214
Reaction score
246
Location
ft mac,AB
I think but not 100% sure that an update/revised reflash is free for the original purchaser.
 

acesup800

Active VIP Member
Joined
Nov 29, 2008
Messages
1,372
Reaction score
2,518
Location
BC
That rite there is rape, theres no reason for that. One of the reasons i wont buy a ball cap from that certain dealer north of Edmonton
The $700 is $500USD right off Silber's website for a reflash. They state the reasons for the cost, but regardless, don't see why this is a dealer issue.
 

sick1

Active VIP Member
Joined
Oct 25, 2009
Messages
419
Reaction score
416
Location
Spruce Grove
Ill buy the cord and charge a 40 dollar use fee and u cover the shipping to your place and back. no more getting raped.

I'm totally game for that. The flash cost is why my used silber is still sitting in the shop corner. Would even throw in some beer or fireball or whatever suits your fancy lol
 
Top Bottom