Dfewchuk868
Member
Anyone runnin any aftermarket turbo specific heads on their 14+ etec? Runnin a TSS kit and lookin into that investment.
Aftermarket turbo heads
- Thread starter Dfewchuk868
- Start date
ippielb
Active VIP Member
- Joined
- Mar 4, 2011
- Messages
- 1,912
- Reaction score
- 3,278
- Location
- SE Saskatchewan
- Website
- www.youtube.com
Rktek makes good heads turbo domes. Went from a stockish head to that and it helped with throttle response took some of the lag away in the seat of my pants I think. Note this is on my firecat big bore turbo
Brett Linderman with Arctic Edge in Crowsnest Pass modified the head on my 2013 TSS ski-doo to prevent detonation. Never threw a single code after that. My 2015 will likely end up there this summer for the same treatment.
POWDERCHOWDER
Active VIP Member
Yes go to Linderman I had mine done there no codes and i run pump gas 5-6 lb flawless
fredw
Active VIP Member
Took mine to Linderman as well, he has a turbo specific cut for the head and drops compression ratio a bit on mine.. Never had codes come up yet...
Dannyturbo
Active VIP Member
Lots of guys are going with Linderman's head work, definitely the way to go!
TurboTundraCole
Active member
Can you machine the head to drop compression?
slededjr
Active VIP Member
Yes. Send it to Linderman.
- Thread starter
- #9
Dfewchuk868
Member
Ended up throwin on the Tera alps head. Simple install. Definatly can tell a difference in response. Feels like it picks up boost much quicker. No det, no knock, and the plugs looked pretty damn good after a hard day of pushin em. Looks as good as it feels. Definatly recommended.
Similar threads
