Help...I need 97 Mach Z jetting specs

JBDoo

Active member
Joined
Feb 6, 2010
Messages
92
Reaction score
61
Location
Bentley
I just bought a 1997 Mach Z from North Battleford Sask and it didn't run at all like it did when I picked it up. I checked the elevations of Rimbey and North Battleford and Rimbey is 3100ft and N.B. is 1800ft. I checked the mains and it has 360s in it. My Ski doo race manual is from 99 and doesn't have any specs for the 97s with the 809 triple. The 98 Mach Zs had 300s from factory, so I'd just like to know what it came with from the factory. Thanks for any help Doo guys.
 

Ryeser

Active VIP Member
Joined
Oct 20, 2007
Messages
2,505
Reaction score
946
Location
Parkland County, Alberta (Heart of GBCA)
I just bought a 1997 Mach Z from North Battleford Sask and it didn't run at all like it did when I picked it up. I checked the elevations of Rimbey and North Battleford and Rimbey is 3100ft and N.B. is 1800ft. I checked the mains and it has 360s in it. My Ski doo race manual is from 99 and doesn't have any specs for the 97s with the 809 triple. The 98 Mach Zs had 300s from factory, so I'd just like to know what it came with from the factory. Thanks for any help Doo guys.

PM Mach123, he will know!!!
 

JBDoo

Active member
Joined
Feb 6, 2010
Messages
92
Reaction score
61
Location
Bentley
I phoned a friend and got the specs. They ran 380s....I can't believe they were such big jets. The 98 ups only run 300s. I put somw 320s in it and will keep a close eye on it before any real pulls. I found several spot that I could download the whole spec books but I'm on dial up :(
 
Top Bottom