96 f111 triple 600

popcorn popper

Active VIP Member
Joined
Nov 26, 2008
Messages
464
Reaction score
511
Location
central alberta
Im working on a f3 600 triple to rip around here. You guys remember what cranking compression should be? 120 ish? Im getting 110 on two and 105 on pto. Seems a smidgen low. Thanks Steve
 

wildthangci

Member
Joined
Feb 7, 2016
Messages
22
Reaction score
25
Location
US
Mines right around 135 across the board.
Yours sounds on the low side and that's a pretty good spread.
 

popcorn popper

Active VIP Member
Joined
Nov 26, 2008
Messages
464
Reaction score
511
Location
central alberta
Thanks guys. Couldn't remember. Had one years ago all tuned with fast pipes. This one done up in s chassis very clean. Was playing with jetting and it has dial a jets was bouncing all over on egts so thinking compression down and its acting funky.
 

Mach1

Active VIP Member
Joined
Sep 23, 2015
Messages
932
Reaction score
765
Location
Kimberley
Yep my favourite sled 135 140 and she is fast, radar at 107 mph out of the box
 

popcorn popper

Active VIP Member
Joined
Nov 26, 2008
Messages
464
Reaction score
511
Location
central alberta
So thats stock compression? This sled has between.065-.070 squish. Has wiseco pistons and 4 dot gasket. Cylinders look good. Looks like doo does not offer pistons anymore or base gaskets.
 

Mach1

Active VIP Member
Joined
Sep 23, 2015
Messages
932
Reaction score
765
Location
Kimberley
Call mots machining in edm give him specs and will set you up, good luck
 

popcorn popper

Active VIP Member
Joined
Nov 26, 2008
Messages
464
Reaction score
511
Location
central alberta
Oh yes Tom. I found pistons and gaskets, not sure why this one so low. Pistons and cylinder looksgreat. Maybe never got a good seat. Will redo see where it goes. I hope that cures it.
 
Top Bottom