Hand warmers

AkNomad

Active VIP Member
Joined
Feb 2, 2010
Messages
1,538
Reaction score
1,764
Location
Alaska
Anyone have a schematic or wiring diagram for the hand warmers on these sleds and does anyone know if there is a difference between actual heaters on the 2021 and previous years sleds (2017-2020)? I've been having issues with mine since I bought it, I put new warmers on and they worked great for about 2 hours when the throttle side warmers quit working and I've been trying to figure it out ever since.
 

brian h

Active VIP Member
Joined
Jul 21, 2009
Messages
814
Reaction score
1,425
Location
edmonton alberta
Have you had it at the dealer, they can program the heaters and that maybe all you need. Also believe the heaters on the gen4 for .17 to 21 years are the same
 

AkNomad

Active VIP Member
Joined
Feb 2, 2010
Messages
1,538
Reaction score
1,764
Location
Alaska
The problem I’m having is they quit working but my thumb warmer works great. I was working on it yesterday and found that a couple of the inner locks for the pins had broken so I have 2 new connectors headed this way and that should fix my problem.
 

NoBrakes!

Active VIP Member
Joined
Nov 13, 2011
Messages
6,002
Reaction score
11,802
Location
Edmonton
I also broke that connector when installing new bars this year... PIA to keep the pins all aligned
 

AkNomad

Active VIP Member
Joined
Feb 2, 2010
Messages
1,538
Reaction score
1,764
Location
Alaska
I also broke that connector when installing new bars this year... PIA to keep the pins all aligned
I think the PO of my sled may have broken them since he had put CFR bars with heaters on it, couldn't figure out for the life of me why my new ones weren't working properly, now I know. Thankfully they aren't hard to change. Did you get your new connector from your dealer or an online source like I did?
 

NoBrakes!

Active VIP Member
Joined
Nov 13, 2011
Messages
6,002
Reaction score
11,802
Location
Edmonton
dealer.. it was a pain... they ordered the sled side first, waited 2 weeks and then got the right one.
 

AkNomad

Active VIP Member
Joined
Feb 2, 2010
Messages
1,538
Reaction score
1,764
Location
Alaska
dealer.. it was a pain... they ordered the sled side first, waited 2 weeks and then got the right one.
I found them online and ordered the 4 and 6 pin connectors off of eBay, should be here tomorrow just in time for riding this weekend. I called my dealer yesterday and he said I would have to buy the entire harness to get those plugs, which made no sense since they are not actually part of the main harness and only attach to the heaters and kill switch. I pulled the part numbers directly off the connectors and did a search online and found several places where you can get them. Mine cost $24 and change shipped 2nd day Fedex, if i may ask, what did yours cost you?
 

NoBrakes!

Active VIP Member
Joined
Nov 13, 2011
Messages
6,002
Reaction score
11,802
Location
Edmonton
simliar pricing, i think it was around 13$ but I cant remember. The mechanics had part numbers for them that weren't on the parts desk screen. It was a ****around

just the plastic no rubber
 

AkNomad

Active VIP Member
Joined
Feb 2, 2010
Messages
1,538
Reaction score
1,764
Location
Alaska
Not sure if mine will come with the rubber insulator or not but we'll find out tomorrow, i'll post up the results once I get them installed.
 
Top Bottom