Anybody cut their tunnel g4?

jereber · Oct 27, 2020

Just curious if anybody has cut their tunnels to make an expert out of their standard sled. Is it alot of work, is it worth the battle? I'm curious, all i can find is guys that order a shorter cooler and take everything apart. Easier ways?

GreyGhost · Oct 27, 2020

jereber said:
Just curious if anybody has cut their tunnels to make an expert out of their standard sled. Is it alot of work, is it worth the battle? I'm curious, all i can find is guys that order a shorter cooler and take everything apart. Easier ways?

Nope that’s the easiest and cheapest. You can get someone to weld the cooler for you but have higher chance of it leaking. IMO you might as well get the cooler and just cut the sides of the tunnel. You’ll also need some more stuff besides the cooler.......

rknight111 · Oct 27, 2020

Are you making the tunnel shorter or just changing out the rear mud flap portion and end aluminium part on the tunnel. That’s quite easy if your doing that.

tko sled ed · Oct 27, 2020

Easier to change rails and track
154 std now your a 165 expert and so on

NoBrakes! · Oct 27, 2020

Theres a vid of a guy doing the whole tunnel swap..
G4 tunnel chop

jereber · Oct 28, 2020

Thank you guys for the input, i figured it would be alot of work. But doesn't hurt to ask.

jereber · Oct 28, 2020

I was told to put the 165 skid under the 154 tunnel for early riding but then the 165 tunnel with 154 wouldnt work haha

Anybody cut their tunnel g4?

jereber

Active VIP Member

GreyGhost

Active VIP Member

rknight111

Administrator

tko sled ed

Active VIP Member

NoBrakes!

Active VIP Member

jereber

Active VIP Member

jereber

Active VIP Member

Similar threads