MXZ Race Spindles on GEN4 Summit

kingcat162

Active VIP Member
Joined
Dec 16, 2013
Messages
1,292
Reaction score
1,582
Location
Alberta
Old post - but I recently just finished doing the expensive race spindle swap on my 2015 T3 - I'm excited to try it out - I'll post a pic when she's 100% back together - I had to get sleeves made at a machine shop for the 2019 ball joints so they would fit in my t3 lower a-arms - all in - parts&machine shop was around $1200 I think - ball joints/spindles/ski axles/bushings/ski rubbers/etc.
 

kingcat162

Active VIP Member
Joined
Dec 16, 2013
Messages
1,292
Reaction score
1,582
Location
Alberta
Much taller in the front now? Same width?
Same width - looks and feels like a 3" lift at least - didn't really do any b4 and after measurements - my raptor springs might beat off my upper a-arms - might be forced to go to fox shocks in the front - thats ok - I always wanted a $60,000 sled
 

NoBrakes!

Active VIP Member
Joined
Nov 13, 2011
Messages
6,002
Reaction score
11,802
Location
Edmonton
did you say beat off lol

Maybe we will run into eachother this winter and I can take a look at the old dirty B
 

kingcat162

Active VIP Member
Joined
Dec 16, 2013
Messages
1,292
Reaction score
1,582
Location
Alberta
did you say beat off lol

Maybe we will run into eachother this winter and I can take a look at the old dirty B
Lol absolutely - I'm hoping to get out a bunch this season - if they do beat off my arms I'll take the backside of the axe from eagles cabin to 'er - done that b4 - probably won't see very many turbo sleds on the hill this yr that have bluetooth data logging capabilities to their phone like the
 

kingcat162

Active VIP Member
Joined
Dec 16, 2013
Messages
1,292
Reaction score
1,582
Location
Alberta
The dirty banana is back together - hopefully have some dyno #'s soon
20211008_203327.jpg
20211008_203310.jpg
 

maxwell

Active VIP Member
Joined
Apr 25, 2007
Messages
19,835
Reaction score
41,645
Location
Sherwood Park, Alberta, Canada
Lol absolutely - I'm hoping to get out a bunch this season - if they do beat off my arms I'll take the backside of the axe from eagles cabin to 'er - done that b4 - probably won't see very many turbo sleds on the hill this yr that have bluetooth data logging capabilities to their phone like the

No you won’t because you literally don’t have to do that anymore lol. But I admire your passion a good running XM turbo is fast as fawk
 

kingcat162

Active VIP Member
Joined
Dec 16, 2013
Messages
1,292
Reaction score
1,582
Location
Alberta
No you won’t because you literally don’t have to do that anymore lol. But I admire your passion a good running XM turbo is fast as fawk
I won't have to data log - but the option will be there - my boost mapping will be run off the 02 sensor - it's going on the dyno for the tuning - so once on the hill the sled will just be using the bluetooth to display a dash on the tablet mounted - the newer sleds don't need these options nor even a dash display at all because they aren't pushing 10 lbs of boost
Screenshot_20210407-134246.jpg
 
Last edited:

kingcat162

Active VIP Member
Joined
Dec 16, 2013
Messages
1,292
Reaction score
1,582
Location
Alberta
What kind of system has what your taking about?

I am quit intetested
Not very many people are even aware that this ecu exists - with the electronics shortage it might not be available this year - it's called the aurora box - it controls the boost injectors off of the 02 sensor in the pipe - the fine tuning is anyways it still has a base map it will fall back on if the 02 ever craps out - bluetooth to the phone or laptop or tablet - data logging capable - can pre-make a number of fuel maps on your phone and try diff ones if you want - can change the gauges on the display(picture above) to show whatever info you want - this ecu is great for changing weather with humidity and Temps no adjustment needed manually unlike my redline box - this box is only good for people with sleds that wanna run high boost and are having issues with backfiring and mapping issues due to your sled being older and not having auto tune like the gen4's - this turns my dinosaur xm into an auto tune for the boost injectors which is what I've been needing for 6 yrs now
 

frock

Active VIP Member
Joined
Nov 16, 2008
Messages
526
Reaction score
1,125
Location
Northern BC
Not very many people are even aware that this ecu exists - with the electronics shortage it might not be available this year - it's called the aurora box - it controls the boost injectors off of the 02 sensor in the pipe - the fine tuning is anyways it still has a base map it will fall back on if the 02 ever craps out - bluetooth to the phone or laptop or tablet - data logging capable - can pre-make a number of fuel maps on your phone and try diff ones if you want - can change the gauges on the display(picture above) to show whatever info you want - this ecu is great for changing weather with humidity and Temps no adjustment needed manually unlike my redline box - this box is only good for people with sleds that wanna run high boost and are having issues with backfiring and mapping issues due to your sled being older and not having auto tune like the gen4's - this turns my dinosaur xm into an auto tune for the boost injectors which is what I've been needing for 6 yrs now
Who builds this box and will it work on other sleds besides Doo?
 

kingcat162

Active VIP Member
Joined
Dec 16, 2013
Messages
1,292
Reaction score
1,582
Location
Alberta
Who builds this box and will it work on other sleds besides Doo?
This box is hand made by my buddy Dave Sebelius in North Dakota - it will run on any sled but like I said electronics shortages this yr so probably not available this season which really sucks because this box will make people's lives alot easier that have a high boost heavily modified sled like myself - they are still out there - not everyone is all about zero boost and an expensive bikeman tune
 

frock

Active VIP Member
Joined
Nov 16, 2008
Messages
526
Reaction score
1,125
Location
Northern BC
I'm running 10 lbs as well on a Boondocker setup on my Cat. That setup looks pretty sweet.
 

kingcat162

Active VIP Member
Joined
Dec 16, 2013
Messages
1,292
Reaction score
1,582
Location
Alberta
I'm running 10 lbs as well on a Boondocker setup on my Cat. That setup looks pretty sweet.
Ya that pic I posted above is a screenshot of my phone with the sled idling in the shop bluetooth connected to the aurora box that is connected to the boost injectors and all the other sensors - intake air temp - boost - fuel pressure - ambient air temp - afr's - water temp - barometric pressure - voltage- TPS - gps for actual land speed and not track speed - basically everything the engine is doing - can data log at anytime - change the mapping if you want - bluetooth to your laptop if you want - change each individual gauge to whatever you want - for me and what I'm trying to achieve its absolutely perfect - some people want warranty and super duper low boost like zero boost like 14.7 in the manifold at all times - for something like that you don't need gauges and those people can love their no gauges and their no boost - and I will love my old samsung S5 active gauges
 

Woodsie1984

Active VIP Member
Joined
Nov 12, 2012
Messages
404
Reaction score
766
Location
Pg B.C
Old post - but I recently just finished doing the expensive race spindle swap on my 2015 T3 - I'm excited to try it out - I'll post a pic when she's 100% back together - I had to get sleeves made at a machine shop for the 2019 ball joints so they would fit in my t3 lower a-arms - all in - parts&machine shop was around $1200 I think - ball joints/spindles/ski axles/bushings/ski rubbers/etc.
Do you have any pics of the sleeves you had made up ?
 

kingcat162

Active VIP Member
Joined
Dec 16, 2013
Messages
1,292
Reaction score
1,582
Location
Alberta
Do you have any pics of the sleeves you had made up ?
sorry I didn't take any pics was in a hurry to put em on - I took the fab shop the xm ball joint - the gen 4 ball joint and an old lower a- arm I had - and they machined the filler sleeve and expanded the sleeve with heat and installed it on the gen4 ball joint so it fits and runs in the stocker T3 lower a-arms tight like a
20211231_153545.jpg
 

Woodsie1984

Active VIP Member
Joined
Nov 12, 2012
Messages
404
Reaction score
766
Location
Pg B.C
sorry I didn't take any pics was in a hurry to put em on - I took the fab shop the xm ball joint - the gen 4 ball joint and an old lower a- arm I had - and they machined the filler sleeve and expanded the sleeve with heat and installed it on the gen4 ball joint so it fits and runs in the stocker T3 lower a-arms tight like a View attachment 249712
Thinking bout doing this to my 1200 4 stroke try make it easier to keep on its side and easier to tip over…running a cr-m10 rear suspension with baker t-motion rear arm
 
Top Bottom