Skidoo 850 Clutch kits - Available soon

dragonweld28

Supporting Vendor
Joined
Dec 8, 2011
Messages
1,311
Reaction score
4,511
Location
Edmonton
I have a few kits out testing with various riders to confirm what I was able to find on the 850 that I owned. Im currently just waiting on a backorder of weights.
Who would be interested in a kit? Feel free to ask me some questions.

Skidoo 850 clutch kit.jpg
 

CatAttack900

Active VIP Member
Joined
Oct 17, 2008
Messages
155
Reaction score
92
Location
Taber, Alberta
I would be interested in a kit.
a few questions: Are you gearing down with the kit or just clutch components?
what track speed you seeing? Stock vs clutched?
any chance you took temps of clutches, stock vs clutched?

what are your results you have accomplished with clutching over stock.

thanks in advance
 

dragonweld28

Supporting Vendor
Joined
Dec 8, 2011
Messages
1,311
Reaction score
4,511
Location
Edmonton
21/53 is the gearing to have. Thats what i tested with.
Stock track speeds on a 165 3" with a 240lb rider in good snow was 63-64 kph. The clutch kit would hold 68-69kph.
I never had an actual temp gun. But you were able to put your hands on the clutches after many hard pulls were the stock set up you couldn't.

To me, the bottom end is way better. Much stronger out of the hole and held rpm better. I also found that the on off throttle response was better.
 

CatAttack900

Active VIP Member
Joined
Oct 17, 2008
Messages
155
Reaction score
92
Location
Taber, Alberta
21/53 is the gearing to have. Thats what i tested with.
Stock track speeds on a 165 3" with a 240lb rider in good snow was 63-64 kph. The clutch kit would hold 68-69kph.
I never had an actual temp gun. But you were able to put your hands on the clutches after many hard pulls were the stock set up you couldn't.

To me, the bottom end is way better. Much stronger out of the hole and held rpm better. I also found that the on off throttle response was better.


thanks for the reply, on my expert I held 7900-8000 rpm on most climbs in deep snow but I believe the back shift could be better.
 

CatAttack900

Active VIP Member
Joined
Oct 17, 2008
Messages
155
Reaction score
92
Location
Taber, Alberta
Yeah I don’t know much about skidoo clutching, this is the first skidoo I have ever owned, so any help would be greatly appreciated!! I just know there is always improvements to make over stock clutching
 

Rotax_Kid

Active VIP Member
Joined
Dec 30, 2008
Messages
1,174
Reaction score
2,560
Location
Balgonie, SK
I have a few kits out testing with various riders to confirm what I was able to find on the 850 that I owned. Im currently just waiting on a backorder of weights.
Who would be interested in a kit? Feel free to ask me some questions.

View attachment 221749
Curious...what is the BDX ring for? Is that a seat for secondary spring or primary spring shim?
 

dragonweld28

Supporting Vendor
Joined
Dec 8, 2011
Messages
1,311
Reaction score
4,511
Location
Edmonton
Just supply the parts. I have the helix's now, but was back ordered on the weights.... so frustrating.
 

dragonweld28

Supporting Vendor
Joined
Dec 8, 2011
Messages
1,311
Reaction score
4,511
Location
Edmonton
I have everything in stock now. Let me know if your looking for one.

Cheers
 
Top Bottom