Kill switch delete

2012ProRMK · Jan 13, 2020

So I've had my kill switches flipped upside down and years but every once in a while they get water in them and freeze and no longer work, which is a pita.

Considering getting a munster one, but I don't really use it anyway. Can I just either unplug the killswitch from the harness or take the wires and tire then together and delete the switch? Or is there more to it?

Thanks

lilduke · Jan 13, 2020

2012ProRMK said:
So I've had my kill switches flipped upside down and years but every once in a while they get water in them and freeze and no longer work, which is a pita.

Considering getting a munster one, but I don't really use it anyway. Can I just either unplug the killswitch from the harness or take the wires and tire then together and delete the switch? Or is there more to it?

Thanks

yeah just unplug it. I have no kill switch on mine

NoBrakes! · Jan 13, 2020

broke the button off mine this weekend, what a PIA to get the little piece inside to pop back out... looking at options now too. relocate, momentary or delete?

ducati · Jan 13, 2020

I always used an O ring under the kill switch to stop accidental shutdown while keeping the switch useable. Essentially makes it a momentary switch for damn near free.

Bnorth · Jan 13, 2020

Just leave it in the stock position and wrap a few O-rings or one of the ol lady's hair elastics around it to turn it into a momentary switch. No freezing issues and no accidental shutoffs from hitting it with your chest.

NoBrakes! · Jan 13, 2020

Does the new red cap just snap back on? the little clear post underneath took a beating on mine too...

Bnorth · Jan 13, 2020

NoBrakes! said:
Does the new red cap just snap back on? the little clear post underneath took a beating on mine too...

Yeah it snaps back on as long as you didn't mangle the white part too bad with the leatherman pulling it back up. Doo doesn't sell the button though, only the whole assembly.

2012ProRMK · Jan 13, 2020

Just took it off and unplugged from harness, works good don't think ill miss it.

kimrick · Jan 14, 2020

Bnorth said:
Yeah it snaps back on as long as you didn't mangle the white part too bad with the leatherman pulling it back up. Doo doesn't sell the button though, only the whole assembly.

I have seen lots of guys just put a small screw in be done.
Gives you something to grab.....

I actually got warranty on my 2016 Doo.
I did have the Red cap in hand and told them it fell off when I pulled it out.

Gibsons can atest to this.
He was suprised as hell that we found it ib all the deep snow. LOL

Shermanator · Jan 14, 2020

I have the Munster, works great...

gibsons · Jan 14, 2020

I remember that

kimrick said:
I have seen lots of guys just put a small screw in be done.
Gives you something to grab.....

I actually got warranty on my 2016 Doo.
I did have the Red cap in hand and told them it fell off when I pulled it out.

Gibsons can atest to this.
He was suprised as hell that we found it ib all the deep snow. LOL

giddyup · Jan 28, 2020

with some guys taking them off, anyone got one they want to sell, i need one for a Gen4 PM me if you got one

Kill switch delete

2012ProRMK

Active member

lilduke

Active VIP Member

NoBrakes!

Active VIP Member

ducati

Active VIP Member

Bnorth

Active VIP Member

NoBrakes!

Active VIP Member

Bnorth

Active VIP Member

2012ProRMK

Active member

kimrick

RIP Fellow Sledder

Shermanator

Active VIP Member

gibsons

Active VIP Member

giddyup

Active VIP Member

Similar threads