2018 warranty bulletin, stripped/broken bolts?

Merc63

Active VIP Member
Joined
Aug 24, 2014
Messages
1,843
Reaction score
2,904
Location
Alberta
Anyone else see or hear about this??


Warranty Bulletin 2018-4
November 3, 2017
850 E-Tec - Driven pulley bearing support bolts out of specification

Testing involves checking torque specs (24 lb/ft) on the two bolts. Seems BRP is out in front of the problem and has remedies in place to replace broke/stripped bolts.
 

maierch

Active VIP Member
Joined
Oct 26, 2008
Messages
1,565
Reaction score
2,512
Location
Calgary
Where did you find this? and which bolts are we talking primary?

The Driven pulley is the secondary. By the description I would guess the the Nylock nuts that hold the secondary clutch tower were over torqued and potentially stripped. Hopefully the studs are fine.

A quick google search found this....
View attachment 2018-004 en small.pdf
 

Merc63

Active VIP Member
Joined
Aug 24, 2014
Messages
1,843
Reaction score
2,904
Location
Alberta
It's a bulletin that was just released, just got off the phone with the dealer. I have the bring the sled back to check it, you'd think they would be calling guys to bring them back?

is this something that could leave you stranded?
 

Merc63

Active VIP Member
Joined
Aug 24, 2014
Messages
1,843
Reaction score
2,904
Location
Alberta
Well it's just torquing to 24 ft lbs. if it breaks the threads, new bolt... will the dealer whine if I do this myself to save a trip there??
 

Merc63

Active VIP Member
Joined
Aug 24, 2014
Messages
1,843
Reaction score
2,904
Location
Alberta
I have what appears to be a 2x grade 8? (Gold) hex bolts both with paint mark to suggest they were torque checked. Are the ones breaking, silver and not grade 8 I wonder?

The bullet doesn't make sense. It talks about a bolt and nut, I only have a bolt going into the support bracket. The bracket is threaded. I don't see how you'd reach a nut to the bottom bolt, access is tight and limited on the back side.

Edited, on second read, I see they remove the clutches to gain access. Not sure why they want a nut on it now, unless it's the bracket threads that are ripping off or worried they are weakened after the bolt threads break?


Edit2: Hit mine with 24ft lbs, got about an 1/8th turn before the click, seems secure.
 
Last edited:

SidewaysInto3rd

Active VIP Member
Joined
Dec 30, 2009
Messages
1,357
Reaction score
2,627
Location
Sḵwxwú7mesh, BC
If you have a grade 8 bolt you are good.

I removed two none graded bolts from my sled and replaced them with grade 8 bolts supplied by my dealer and torqued them.

Some sleds got inferior hardware. That’s it.

Don’t try to tighten them if your bolts are not grade 8
 

norona

Active VIP Member
Joined
Jan 1, 2009
Messages
2,141
Reaction score
7,923
Location
North Vancouver
Website
www.noronalife.com
This has nothing to do with the color of bolts, or the grade, infact as some of you know using to hard of a bolt makes it brittle. To check these two bolts make sure they are torque to spec, if they are to torque they are fine, if one is broken already or they break when torqued, the replacement bolt is longer goes through to the end and has a nut. Your dealer has this bulletin and will check it for you. Don't worry about the grade of bolt
 

Merc63

Active VIP Member
Joined
Aug 24, 2014
Messages
1,843
Reaction score
2,904
Location
Alberta
Just seen on FB group, BRP released a new bulletin for these bolts to be all replaced on the 2018s, no more torque and test.
 

Merc63

Active VIP Member
Joined
Aug 24, 2014
Messages
1,843
Reaction score
2,904
Location
Alberta
Dave, why the nut? From what Ive seen it said use a nut if the bolt breaks. If they don't break, replace with the proper bolt. There is threads in the support bracket that the bolt torques to, what difference does using a nut on top of that make? Just thinking out loud, thanks
 
Top Bottom