Can anyone tell why my 600 triple touring is back firing. It runs along just fine and then for no apparent reason I loose power then I have to feather the throttle to get it going. This is when it back fires and then it seems to be ok and runs hard again.
2000 triple touring
- Thread starter Fredd4
- Start date
TROLLCAT
Active VIP Member
Tighten the throttle cable up switch in the thumb piece is acting up
- Thread starter
- #3
TROLLCAT
Active VIP Member
The pin on the thumb throttle inside handle bar control , its a safety if you fall off and the throttle sticks it kills the machine, there should be 1/16 inch play on thumb piece , tighten cable at all three carbs, its common problem
- Thread starter
- #5
TROLLCAT
Active VIP Member
your welcome
Similar threads
