Search results

I have the boost-it an intercooled XM never had a problem. what happened to boost-it ? Why they closed

Yes it does. That's the problem. The housing that is riveted to the tunnel is cracked so bad the lower gear moves and hits the cover. I all ready have a belt drive on it. I was hoping that someone knew of a aftermarket chain case housing that was stronger than stock

It's not the cover that cracked. It's the inner case that cracked all around the lower gear. This cracked case housing allows that lower gear to move in and out so bad that the gear hits and rubs on the cover. i need an after market chain case housing.

Yes it does. i have the c3 drive on it now, and the case flexs so bad the lower gear rubs on the belt drive. The noise and vibration is how I discovered it was cracked

I've got a 2016 XM and the inner chain case is cracked all around the lower gear. Im looking at replacing the inner case however the rivets holding the case to the tunnel looks like a different style of rivet. has anyone had to replace the inner cover and these rivets? Any help or guidance...

No you won't notice any performance differences. Race gas will help to insure you have a sufficient amount of octane. Ive got just over 3500 km,s on mine and I only add 6 litres of furry 112 per tank

We rode frisbee

Ive got a 2013 nitro with the mcx 270 kit. Mix 50% av gas with premium and run lower boost for when your at home. Crank up the boost and you can use less av gas for when your in the mountains. I only add 6 litres of 112 race gas to every tank when I'm up in the mtns and I've got over 3000 Kms...

Bring some duct tape and bungee cords to help you hold on

Fort Mac

Hey brad, I've got new front left and right control arms with fox shocks and a complete rear skid fox shocks all ready for when ya get back

Summit River lodge, do U have room for a 41 foot toy hauler? How much per night with power ?

Right on . I will call in the morning.

I'm looking for some advise on setting up my rear K-Mod skid. im about 200lbs with all my gear on and ride a 2013 turbo nytro. what kind of shock pressures should I start with. I also have the skins front end with the fox evols as well. Thanks for all your help !!!

Who sells the skinz concept front end for a 2013 Nytro MTX also I'm looking for a set of Simmons gen 3 skies. thanks

I have a 2013 nytro with a 270 MCX bought new from PG Yamaha. A different dealer just installed the EPI purple secondary spring set a 0-1 and now it revs at 9100 and hits the rev limiter at 7000 ft. Not to mention it burns way more fuel than normal. 2 bars going up Renshaw trail !! what clutch...

where do u get your 120 ? It's $100 for a 19l pail up here in fort mac

Ahh yea but it's not December yet ?

Does this kit come complete with everything for the use of the stock fox floats or do we need to buy different bushings ?

Sweet. Thanks for the link.