Hey, wondering if someone could measure the ohms of the bc valve. I bought a second hand kit and guy said it needed to be replaced and just want to verify. Thanks Rob
That is common Sea Doo & Ski Doo part used to control RAVE. It is pulse width modulated by the Boondocker control box, just use 12vdc & see if it clicks.....that is just the electrical part of it & does not mean it is good.
You need to follow the pressure or vacuum test procedure to make sure internally it is switching correctly. More often this is likely the problem, it can fail electrically just less likely. I would test it under pressure as that is how it is used in the Boondocker application.