How to adjust boost pressure on boost-it 2012 pro

TravisShyback

Member
Joined
Jan 4, 2018
Messages
6
Reaction score
0
Location
Alberta
Recently bought a new sled and my wife is going to be riding my old one this year. I am the second owner and have never really messed with how the turbo is set up, long story short....its running 12psi and straight race gas and would like to turn down the boost a bit for her. Any help would be appreciated.
2012 pro 163 3"
Z-bros 36" front end
Fox Evols all around
boost-it turbo set at 12psi according to the boost gauge
boost-it XIC fuel controller
 

mountainsledmania

Active VIP Member
Joined
Dec 28, 2009
Messages
1,187
Reaction score
1,231
Location
sherwoodpark
Recently bought a new sled and my wife is going to be riding my old one this year. I am the second owner and have never really messed with how the turbo is set up, long story short....its running 12psi and straight race gas and would like to turn down the boost a bit for her. Any help would be appreciated.
2012 pro 163 3"
Z-bros 36" front end
Fox Evols all around
boost-it turbo set at 12psi according to the boost gauge
boost-it XIC fuel controller

turn the boost control knob counterclockwise. can be found on the charge tube and have a reference line that goes to the waste gate
 

+SLEDWRECKS+

Active VIP Member
Joined
Sep 27, 2012
Messages
492
Reaction score
1,096
Location
Sylvan Lake
Probably no control knob on that year.
The setting would be in your XIC box, and scroll through to 'boost duty' I believe and arrow down to desired % level.
I had '11 Pro and I recall 90% equaled 12 psi at 6000ft.
Here's a copy of the fuel map numbers on a '11 Pro to reference. Should have been the same or close to a '12
TravisShyback, I have a few more documents and map changes from Boost-it that may help you.
If you need them, just PM me and I can e-mail you.
2011 boost-it fuel map Capture.JPG
 
Last edited:
Top Bottom