Clutching a pro

UltraLiteTriple

Active VIP Member
Joined
Nov 18, 2007
Messages
189
Reaction score
422
Location
Salmon Arm
For those of you who have, what combination worked for you.
weights, springs, helix.
What didnt work also.
I just installed and waiting to try, 64gr belly busters, blue/pink spring, 60-40 helix
thanks Rob
 

dragonweld28

Supporting Vendor
Joined
Dec 8, 2011
Messages
1,311
Reaction score
4,513
Location
Edmonton
The polaris really lacks on clutching and gearing.

Gear it down and run a shallower multi angle helix.
 

UltraLiteTriple

Active VIP Member
Joined
Nov 18, 2007
Messages
189
Reaction score
422
Location
Salmon Arm
6-7000 feet, 153 2.5 lug, 3" 7 tooth drivers
SLP makes the spring
 
Last edited:

MarkCos

Active VIP Member
Joined
Nov 26, 2011
Messages
691
Reaction score
1,221
Location
So
With the tki gear down kit this rips
0C1534C0-1A0C-451B-84AC-2DC2AC170635.jpeg
 

kanedog

Active VIP Member
Joined
Feb 3, 2015
Messages
3,141
Reaction score
8,615
Location
Kanedog 2015-2019, thanks for the good times S&M!
The blue/pink Slp primary spring is a 140/340 spring. I recommend to stick with stock weights while tuning and change to aftermarket later if you feel the need. Heel clickers are lame.
I'm not familiar with belly buster so I don't know the characteristics of them.
64gram weights with a 140/340 @6000ft might over rev a bit. I have no minimal experience with the team secondary so I cannit advise on secdy setup.
 
Top Bottom