Reeds+more

850xp

Member
Joined
Feb 4, 2011
Messages
6
Reaction score
0
Location
canada
question i have is that i have new vforce reeds to install in my pro along with a BMP pipe/head/team tied and some clutching and pcv,it already has the durability kit from bmp,i had vforce before in my pros but dealer tech did it, i know its pretty straight forwarded but i see so many people doin TPS sync after with PCV is this a must when adding pcv and reeds ect? also i was planning on just installing reeds first running it and then installing head and pipe pcv with map i got from joey from bmp so if i gets a issue ill know which one it was?also with running the new map im running pretty much sea level like 500ft plus should the generic make from bmp be good enuff or anyone have a good flatland map to use with these mods thanks
 

bbecker17

Active member
Joined
Dec 13, 2011
Messages
124
Reaction score
58
Location
Saskatchewan Canada
If BMP knows that you are at 500ft elevation the map they send you should be fine, or best bet would be just call and ask them

as far as TPS i never have had to reset or adjust mine after playing with reeds or throttle bodys and i have no issues,
 
Top Bottom