2012 Pro 800 display screen not working

mybigredford · Dec 31, 2016

Hey guys, my LCD screen isnt working as well as my rear tail light. It was working on and off but now nothing at all, also noticed when screen went of and on so did the tail light.

Sled runs/idles fine, no issues there . Of course I assume there is a short somewhere or broken wire maybe, but cannot find the wire under the hood . does anyone have a wiring diagram you could email me to make it easier. Or anyone have this problem and fixed it that could tell me what the fix was for you and i could check mine out.

Thanks

gdhillon · Dec 31, 2016

The connector is under the hood on the right(throttle side)
You can get to it pretty easy with the right side hood open.
Mine is a 14 but most likely in the same spot

mybigredford · Dec 31, 2016

gdhillon said:
The connector is under the hood on the right(throttle side)
You can get to it pretty easy with the right side hood open.
Mine is a 14 but most likely in the same spot

Thank, I see your from pg too!!

So heres where im at, i have a 2012 Pro 600 as well so i switched hoods and no sreen and tail light, though maybe screen was fried, but nothing as well . screen must be good ....

gdhillon · Dec 31, 2016

I didnt even notice that small world eh haha.

Im not sure never ran into your issue maybe a fuse?

Edit:just reread your post. Did you try your 800 hood on your 600 as well? Try and google for a manual for the pro, i think there is links for pro manuals on backcountry rebels.com

mybigredford · Dec 31, 2016

Yes i have tried swapping hoods and same outcome. I will keep searching!!

Frankenytro · Dec 31, 2016

If the main hood harness (chassis to hood connection located under the hood at the right side of sled) is disconnected the key switch will not work. You would not be able to run e start nor could you kill the sled with the key. Have you tried it to se if it is functioning?

for the record the pros will run with the hood harness disconnected. This simply gets rid of the key switch and headlight/tail light and display.

please check and report back.

mybigredford · Jan 1, 2017

Frankenytro said:
If the main hood harness (chassis to hood connection located under the hood at the right side of sled) is disconnected the key switch will not work. You would not be able to run e start nor could you kill the sled with the key. Have you tried it to se if it is functioning?

for the record the pros will run with the hood harness disconnected. This simply gets rid of the key switch and headlight/tail light and display.

please check and report back.

Sled will fire up with main hood connector disconnected , i actually had the hood right off the sled and was able to fire it up with kill switch disengaged.

Is there a fuse somewhere i could check? I dont have an actual wiring diagram that shows wire colors etc.to trace from rear tail light . I have diagram from a polaris website but it doesnt show me ****, just parts and numbers .

Thanks

gdhillon · Jan 1, 2017

https://www.dropbox.com/s/m1zwgio5clg5w7o/polaris pro ride service manual 11-12-13.pdf?dl=0

I think you have to make an account on drop box but I am pretty sure thats free to do

mybigredford · Jan 1, 2017

gdhillon said:
https://www.dropbox.com/s/m1zwgio5clg5w7o/polaris pro ride service manual 11-12-13.pdf?dl=0

I think you have to make an account on drop box but I am pretty sure thats free to do

Thanks so much, traced some wires tonight and everything seems good, so I give up for now, might have to take it in, not sure where to go from here now . Hate taking it into the dealership.

Rbrduk · Jan 2, 2017

Any bent pins in the connectors?

gdhillon · Jan 2, 2017

mybigredford said:
Thanks so much, traced some wires tonight and everything seems good, so I give up for now, might have to take it in, not sure where to go from here now . Hate taking it into the dealership.

No problem man. I hear you there, stealership bills usualy dent the wallet pretty good.
Maybe give make trax a call and talk to there mechanic. I forget his name but he's usually pretty help full

mybigredford · Jan 3, 2017

Got it figured out, did some more checking, relay went south, all working now!!! Thanks for the schematics gdhillon!!! No dealership!!!

Braaaaaaappp !

gdhillon · Jan 3, 2017

Good to hear man, hope to see ya on the hill one day!

mybigredford · Jan 3, 2017

You bet!!

cody888 · Jan 31, 2017

mybigredford said:
Got it figured out, did some more checking, relay went south, all working now!!! Thanks for the schematics gdhillon!!! No dealership!!!

Braaaaaaappp !

any chance you could point me in the direction of what relay an where tis located. I am having the same problem.

steevo · Feb 16, 2017

The relay is right above your primary clutch inside the velcroed splash cover right on top of your regulator

steevo · Feb 16, 2017

cody888 said:
any chance you could point me in the direction of what relay an where tis located. I am having the same problem.

My problem ended up being the stator

Fun$ · Feb 16, 2017

Staters a bad deal
that will leave you on the hill
i have helped tow a couple of those out

Audette13 · Feb 23, 2018

steevo said:
The relay is right above your primary clutch inside the velcroed splash cover right on top of your regulator

I just had this happen to my sled 14 Pro(didn't notice the tail light thing but lost my gauge, idled fine) in the following link, is the relay #3 which you found faulty on yours?

https://www.polarispartshouse.com/o...a5001070d/electrical-wire-harness-all-options

2012 Pro 800 display screen not working

mybigredford

Active member

gdhillon

Active VIP Member

mybigredford

Active member

gdhillon

Active VIP Member

mybigredford

Active member

Frankenytro

Active VIP Member

mybigredford

Active member

gdhillon

Active VIP Member

mybigredford

Active member

Rbrduk

Active VIP Member

gdhillon

Active VIP Member

mybigredford

Active member

gdhillon

Active VIP Member

mybigredford

Active member

cody888

New member

steevo

Active member

steevo

Active member

Fun$

Active member

Audette13

Active VIP Member

Similar threads