skookumsledder
New member
hey guys i have a 2011 polaris assault, i recently had the sled apart to clean the throttle bodies and check the reeds. everything went good and i put the sled back together and its not running right. when im riding it the instrument cluster turns on and off as well as the break light.
i didnt forget any plugs or connects when i put it back together. i checked the voltage at the regulator from the stator and i was getting 13 to 14 volts. i checked and power wires on the sled and im only seeing .4 volts and every once and a while it jumps to 14 volts. im assuming when its jumping to 14 thats when the clustwer is flashing on. Any idea what it could be?
i didnt forget any plugs or connects when i put it back together. i checked the voltage at the regulator from the stator and i was getting 13 to 14 volts. i checked and power wires on the sled and im only seeing .4 volts and every once and a while it jumps to 14 volts. im assuming when its jumping to 14 thats when the clustwer is flashing on. Any idea what it could be?
