99 Polaris RMK 700 rebuild with Hymark head

kilowatt

Active member
Joined
Feb 25, 2008
Messages
27
Reaction score
6
Location
Drumheller AB
Hi I bought a 99 Polaris RMK 700 with the motor totally apart and am in the process of rebuilding it and putting it back together, it has a Hymark after market head and my question is do you need to put any kind of sealant around the bolt holes or around the heads of the bolts, also the slot in the end of the water pump shaft that drives the oil pump has a lot of wear, any ideas on what is causing that.
Thanks for any help
 

AreWeThereYet

Active VIP Member
Joined
Apr 4, 2009
Messages
12,775
Reaction score
7,554
Location
Grande Prairie
Previous owner probably beat the end trying to remove and install bearings, mine was the same. I just cleaned it up when I rebuild the waterpump.
 
Top Bottom