Ranger 800 rough elk trip on old girl

PapaGNO

Member
Joined
Dec 9, 2007
Messages
8
Reaction score
0
Location
Paradise Hill
Hi I have a few questions i'm looking for answers thanks. I recently got hung up on a stump in the bush and had it in 4x4. I was trying to get off it and it began clunking a bit so i let off. I then realized I now have no 4x4. Once unstuck i looked underneath and could not see any damage. Is it possibe there is a fuse that could of blew? If so which one. Could it be a wire that got hooked underneath? If its my transfer case should it still not be clunking? Also do you know if a guy can get side panels for it. The root eventually went through my side panel on drivers side. Any ideas would be appreciated thanks.
 

neilsleder

Active VIP Member
Joined
Oct 18, 2009
Messages
9,618
Reaction score
17,001
Location
Leduc Alberta
Check your front cv shafts. That's my bet. They can break but the boot will hold it together and look normal. If not pull the front diff plug and see what comes out. If chunks come out that's won't be good. It will probably be the Hillard cage.


Sent from my iPhone using Tapatalk
 

PapaGNO

Member
Joined
Dec 9, 2007
Messages
8
Reaction score
0
Location
Paradise Hill
Thanks. I pulled the plug and there were chunks stuck to the magnet on the plug. Can you rebuild the transfer case or do you need to replace it?
 

neilsleder

Active VIP Member
Joined
Oct 18, 2009
Messages
9,618
Reaction score
17,001
Location
Leduc Alberta
You can rebuild it. Just pull it out and see what went wrong. But start warming up the pocket book it's going to take a beating lol. Good luck.


Sent from my iPhone using Tapatalk
 
Top Bottom