LoginRegister
SnowandMud.com - Powered by vBulletin

Today's Posts
Results 1 to 5 of 5

polaris 600 triple carb problems and settings

Discuss polaris 600 triple carb problems and settings in the SNOWMOBILE RELATED DISCUSSIONS AND RIDING AREA's forums; i was wondering i have a 600 triple sled and pulled the carbs off. reason being is the one closest ...


  1. #1
    Member kinrob1234's Avatar
    Join Date
    Nov 2008
    Location
    casper wyoming
    Posts
    52
    Post Thanks / Like

    Smile polaris 600 triple carb problems and settings

    i was wondering i have a 600 triple sled and pulled the carbs off. reason being is the one closest to the clutches is flooding itself. the spark plug was wet and where you put the plug in was all wet from gas and all that. i was wondering should i tear them apart and clean them or go ahead and rebuild them while i have them apart.also i was wondering on the settings could someone tell me from the screws being all the way in how many turns to come out with them. would all three be the same for adjustment or different . thanks for the input any questions please ask.



  2. #2
    XP V.I.P. Member
    dooryder's Avatar
    Join Date
    Nov 2007
    Location
    Blue river/ edmonton
    Posts
    4,075
    Post Thanks / Like

    Re: polaris 600 triple carb problems and settings

    well normaly on the PTO (clutch) side the jet is bigger to cool it down better due to the extra heat the clutch produces, maybe your float is stuck and is letting more gas then spose to be in
    Ride hard or ride home
    I cant believe I haven't discovered Skidoo before now!

    AZZ HATS!


    May the fallen victims to avalances rest in peace and forever ride on

  3. #3
    Member Brad62's Avatar
    Join Date
    Jan 2008
    Location
    Central Alberta
    Posts
    69
    Post Thanks / Like

    Re: polaris 600 triple carb problems and settings

    Probably your needle and seats are worn and leaking past to flood the cylinders. Take the carbs off and give good cleaning. Pay attention to the current settings ( turns ) on the fuel screws and which clyinder the carbs come off of as the mains are probably different for each cylinder. I have seen lots of this trouble and it usually comes down to a good cleaning and new needle and seats. Also make sure you drain the cases good because with leaking seats the cases get filled up and is hard to get out without draining. Hope it works out.

  4. #4
    Member SNORYDER's Avatar
    Join Date
    Jan 2009
    Location
    SUTTON,ON.
    Posts
    1
    Post Thanks / Like

    Re: polaris 600 triple carb problems and settings

    I have a 99xlt sp 600 triple & I was wondering if anybody knows the proper settings for this sled

  5. #5
    Member kinrob1234's Avatar
    Join Date
    Nov 2008
    Location
    casper wyoming
    Posts
    52
    Post Thanks / Like

    Re: polaris 600 triple carb problems and settings

    i no longer own this sled

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Search Engine Friendly URLs by vBSEO