Muff pot on Axys

polarischik

Active member
Joined
Nov 30, 2014
Messages
93
Reaction score
33
Location
Calgary
Just got a new Axys and usually keep the stock can. I also happen to like a hot lunch! Anyone mount a muffpot and if so where? Want to share a picture?
 

takethebounce

Active VIP Member
Joined
Dec 10, 2008
Messages
5,193
Reaction score
8,750
Location
calgary
Just got a new Axys and usually keep the stock can. I also happen to like a hot lunch! Anyone mount a muffpot and if so where? Want to share a picture?

I am not sure it can be done but I have heard it could. It was hard enough on a stock Pro can but with a piece of aluminum angle plate between where the can and pipe connect it was able to fit. The Axys can is even larger but I will post a picture to give you an idea how we did it on the Pro's.

https://www.hardcoresledder.com/forums/attachment.php?attachmentid=523582&stc=1&thumb=1&d=1326661094


2da464a05ec4ee085b688d4aa89c2be3.jpg
 

robu

New member
Joined
Jun 16, 2008
Messages
1
Reaction score
2
Location
kamloops bc
I did the same mount on my sons Axys! the pipe is double walled! Just make sure u drill and rivet into into the first wall or outer surface of the pipe! Looks and works perfect. I don't think you would want to weld it on as there was insulation between the two walls of the pipe.
 

Tchetek

Active VIP Member
Joined
Nov 11, 2013
Messages
2,680
Reaction score
6,698
Location
Alberta
Install my muff pot on factory can last night.

Mmmm. Warm muff. Vroom vroom. Brappp brappp.
66d718d1d8ba4dc837d8b82240d1c734.jpg
6fd2df1cf70a7eabebb7b83dd74513aa.jpg
a90a9f67bcd95fa11a22cebabe8f44f4.jpg
e246097a11f717865132fb556bc847a4.jpg
b5c4b145526bd411036d6a50b234cbed.jpg
 

Tchetek

Active VIP Member
Joined
Nov 11, 2013
Messages
2,680
Reaction score
6,698
Location
Alberta
Use closed head stainless steel rivet.
No exhaust leak

Apparently double wall, so rivets only into the void space between.

Not stainless yet. I’ll switch them out if needed due to issues.

Wanna stay quiet on this sled. If it doesn’t work out I’ll change the whole exhaust out. Maybe find a extra pony or two. But Wanna put some seat time in first.

Hot sausage McMuffins on me!
 

thriller

Member
Joined
Oct 5, 2007
Messages
24
Reaction score
2
Location
Sparwood BC
I know this is an old post but was wondering if anyone was using the mbrp trail can with a muff pot? I mounted it right after the joint going to the MBRP. I tried but in the powder, my exhaust temps seem low at between 90-110F.
 
Top Bottom