3" track with belt drive

old700

Active member
Joined
Nov 18, 2008
Messages
149
Reaction score
210
Location
Rimbey
I got a 16 162 2.6 with a Kurts Gear down (No tensioner, just larger diameter pulleys and more tooth contact than stock) and am pondering switching to a 3" track for next season. Has anybody had any troubles running a 3" with the quickdrive?
Thanks
 

007sevens

Active VIP Member
Joined
Nov 24, 2009
Messages
20,958
Reaction score
16,974
Location
At my Place in Alberta
I got a 16 162 2.6 with a Kurts Gear down (No tensioner, just larger diameter pulleys and more tooth contact than stock) and am pondering switching to a 3" track for next season. Has anybody had any troubles running a 3" with the quickdrive?
Thanks

I went through three belts on a Slober turbo kit. It didn't take much to remove the cogs and this was a 2.4". On my Hm turbo I went with C3 and once I found the right tension I had no problems running a 3" track

no experience with Kurts stuff, Sorry
 

rightsideup

Active VIP Member
Joined
May 19, 2008
Messages
3,019
Reaction score
2,831
Location
bc
I have a tki on a 174 x 3 2017 poo with a bd side kick no issues yet
 

Dazzler

Active VIP Member
Joined
Oct 22, 2009
Messages
922
Reaction score
2,004
Location
Cochrane Ab
I got a 16 162 2.6 with a Kurts Gear down (No tensioner, just larger diameter pulleys and more tooth contact than stock) and am pondering switching to a 3" track for next season. Has anybody had any troubles running a 3" with the quickdrive?
Thanks

I have around 1000 k on my 15 Pro so far, running stock Polaris quick drive, BD turbo @ 10lbs, 15x162x3" track and no issues yet..
About 1200 k on the 13 Pro, Kurts gear down, BD turbo @ 6 lbs, 15 x 163 x 2.4 track.. Bounced the bottom drive sprocket off a stump last Christmas and cracked it so the factory quick drive is back on for now.
 

ktmsx350f

Active VIP Member
Joined
Nov 9, 2014
Messages
587
Reaction score
514
Location
fort mcmurray
1500 miles with boost and no issues with belt drive on the Axys. I used to change belts on stock pro rmk's all tje time Axys seems to be alot better on belts IMO
 

old700

Active member
Joined
Nov 18, 2008
Messages
149
Reaction score
210
Location
Rimbey
All a guy has to do is switch to the Avid 3" pitch 7 tooth drivers correct? Would be using a Camso track.
 

Teth-Air

Active VIP Member
Joined
Oct 16, 2008
Messages
3,734
Reaction score
7,909
Location
Calgary/Nelson
All a guy has to do is switch to the Avid 3" pitch 7 tooth drivers correct? Would be using a Camso track.


FYI Powder Freaks makes drivers in BC. They have nice product but I don't know much more. Just say'n in case you need drivers and don't want to import from USA. Otherwise there are a few vendors on here that have the Avid product.
 
Top Bottom