Axys Mods/ Improvements/ Add ons

prairie-rider800 · Dec 17, 2015

As we all know these sleds are wicked machines right out of the box, but I'm curious to hear what you guys are doing to improve these already very capable sleds!

So other than a significant change to the ODO :d what have you guys done to your AXYS?

slededjr · Dec 17, 2015

Jaws now has their complete exhaust system available. No fuel programmer required. 10HP

displacement4me · Dec 17, 2015

I shed more than 11lbs with Alt Impacts 36" Ti a-arm kit, full front end Ti bolt kit, Ti wear bars, and Ti front/rear torque arm with rear bolt kit. That's on top of the near 15lbs I shed with a NPP can.

I'm also in love with the Munster finger throttle!

Husaberg76 · Dec 18, 2015

Added a full slp exhaust. Shed 14lbs and gains are supposed to be +9hp. Fit and finish is top notch, sounds great (not too loud) and you can actually feel the increase in power. A clutch kit was added and no programmers necessary. Next is a one of ,,509 ink wrap which is on its way .

jhurkot · Dec 18, 2015

SLP pipe is a great add on! Be aware though that no fuel controller is required however you will need a resistor in line with your EGT probe if you plan on riding below 4000 ft. In revy I do a lot of riding kind of on the border of that around 3500ft sometimes so I'm considering putting that resistor on a toggle switch. The SLP exhaust fits perfectly and is not too loud. I cannot stand loud cans anymore.

If you have the stock walker shocks pretty much any after market set up is better. I have evol 3's on my front end and love the easy adjustability of them. Also the rear carbon fiber bumper is junk so either rivet in a new piece of aluminum to replace it or get a skinz one.

Stock lower a-arms... ok if you don't ever hit anything ever these will be fine. If the impact transfers directly to the lower a arm it will be bent and easier than you think it should. I have zbros a-arms and they are much better and only one ounce heavier per arm.

Just some of my observations after 800 miles, enjoy your new machine!

Shredder · Dec 18, 2015

Ken at Mountain Magic has went thru his Axys and has some great ideas as to what add ons he would recommend. I bet his will haul azz when he gets done with it.

rightsideup · Dec 19, 2015

I add the dash storage, underwear bag,thing cooker,skidplate,

adamg · Dec 19, 2015

What in the heck is an underwear bag, and why did you put it on your sled??

High Velocity · Dec 20, 2015

Maybe he scares the crap out of himself many times each day. A two compartment bag with clean on one side and dirty on the other would likely be very handy.

Sent from my iPhone using Tapatalk

Vanderberg · Dec 20, 2015

Hace an underseat storage bag and handlebar bag. Also an npp can and polaris extreme front and rear bumper. But be warned that you travel tarp might be too tight to fit as mine ripped when I put it on after the bumper

Scotford · Dec 23, 2015

So after the first few rides figured out that the stock goggle dry compartment will not hold a pair of goggles I figured out my own heated compartment for goggles, also added a tether and a weight reduction losing the suitcase and got the bbq back on....

Sent from my iPad using Tapatalk HD

adamg · Dec 23, 2015

You didn't take the sticker off before mounting the tether.

Scotford · Dec 24, 2015

adamg said:
You didn't take the sticker off before mounting the tether.

Leaving it stock lol.

Sent from my iPad using Tapatalk HD

TimG · Jan 2, 2016

SSI titanium can. Stock is 19.5 lbs, SSI is 2.7. Stock goggle compartment behind windshield works great for me. Just fold em in half and stick them in there- it will work, closes up nicely and doesn't hurt the goggles whatsoever. None of my buddies would believe me till I showed them. I am very interested in weight saving on this sled. SSI Titanium pipe saves 6 lbs. I believe, but is pricey. I'm interested in any weight saving ideas. I'll look into the above mentioned A-arms and Ti bolt kit. Power is the other part of the equation. Waiting on the 910 and 962 kits coming out from Wayde Johnson and Stroker Customs. In talking to them, their kits will use the stock pipe, so there goes that weight savings. It's a first world problem.

Teth-Air · Jan 6, 2016

These sleds transfer too much for my liking. I use this to rein it in.

bsoluk · Jan 7, 2016

Has anybody tried the ice age pro motion yet?

rcbc · Jan 9, 2016

I tried a friends sled (13 pro) with the pro motion, but it also has a 35" front end. It's basically a snow bike with a large 3" paddled
track and 2 skis!

hillclimb10 · Jan 12, 2016

Teth-Air said:
These sleds transfer too much for my liking. I use this to rein it in.

What does this do? Very interested

Teth-Air · Jan 12, 2016

hillclimb10 said:
What does this do? Very interested

Keeps the front end down when climbing. Also I am able to leave the rear shock softer for a better ride the rest of the time.

the450kid · Jan 12, 2016

Teth-Air said:
These sleds transfer too much for my liking. I use this to rein it in.

Very nice Sir! kinda what we had chatted about.. can you Pm me the details and cost

Axys Mods/ Improvements/ Add ons

Active VIP Member

Active VIP Member

Member

Active member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Active VIP Member

Member

Active VIP Member

Attachments

Active VIP Member

Active VIP Member

Active member

Active VIP Member

Attachments

Active member

Member

Active VIP Member

Active VIP Member

Active member

Similar threads