Axys Mods/ Improvements/ Add ons

FastFarmer

Active VIP Member
Joined
Nov 30, 2009
Messages
2,601
Reaction score
6,054
Location
WESTERN CANADA
I’ve run a Redline Turbo set up on two Axys sleds back to back with zero issues...Dave is worth a call for skids and parts, custom makes a stack of them and I would 100% add a 36” front end...total game changer on that sled!
 

armascott

Armaguard
Joined
Dec 1, 2013
Messages
648
Reaction score
786
Location
St.Albert
Looking for suggestions on aftermarket throttle blocks. After riding the deepest snow I've been in this past weekend I was getting pretty tired of the snow and ice build up in the stock one. I was finding I was having push the throttle off to get it back down to idle because of the snow build up. Any suggestions on a good aftermarket system? I'm not really interested in finger throttle prefer thumb style.
 

poo88

Active VIP Member
Joined
Nov 9, 2010
Messages
309
Reaction score
245
Location
turtle lake sk
Looking for suggestions on aftermarket throttle blocks. After riding the deepest snow I've been in this past weekend I was getting pretty tired of the snow and ice build up in the stock one. I was finding I was having push the throttle off to get it back down to idle because of the snow build up. Any suggestions on a good aftermarket system? I'm not really interested in finger throttle prefer thumb style.
Rsi makes a heated throttle block, I dunno if it'll be an improvement or a headache, but it's an option
 

armascott

Armaguard
Joined
Dec 1, 2013
Messages
648
Reaction score
786
Location
St.Albert
Question for quick drive riders, Where is everybody storing spare quick drive belts? I just picked up a spare for my 16 Axys and looking for the best on sled storage place.
 

davelaw1982

Active VIP Member
Joined
Dec 31, 2009
Messages
397
Reaction score
81
Location
Lacombe Alberta
Question for quick drive riders, Where is everybody storing spare quick drive belts? I just picked up a spare for my 16 Axys and looking for the best on sled storage place.

I have mine zip tied to the panel and footwell plate right beside the quickdrive. works well, is out of the way, have had no issues with the zipties breaking or getting kicked. Easy to get to if a change was required
 
Top Bottom