Recent content by TravisShyback

Sled would still run enough to limp it out but no power anywhere. Tried switching the relay above the clutch and the fuse but still no power anywhere.

2013 boost-it pro Anyone have any info on why I would lose power to the DC plug above the clutch cover? Display screen/gauge quit working and lost power from the DC plug above the clutch cover. The 2amp fuse is fine, is there a relay or something I am missing that would cause these issues?

Recently bought a new sled and my wife is going to be riding my old one this year. I am the second owner and have never really messed with how the turbo is set up, long story short....its running 12psi and straight race gas and would like to turn down the boost a bit for her. Any help would be...

Air line running to my boost gauge blew off so the XIC controller wasn't seeing any boost pressure and wasn't adding any fuel....... put the boost line back on and it runs like a top again.

Thanks for the fuel map!! I will check and make sure my box is still set the same. My afr is 14.8 at idle and varies between 13.2-16.5 when on the throttle then goes higher when it falls on its face and sputters till I get off the throttle. Any common issues that would be causing it to run so...

I just bought a boost-it pro, it ran fine the first short ride but now as soon as it builds any boost it’s like it runs itself out of fuel. Need help with how the box is supposed to be set up.