Recent content by potminer

  1. P

    '08 summit Mag side crankshaft seal?

    Sled has intermittent spark. When it does run, gauges are wacky along with no head lights. Traced it back to the stator. Removed magneto to see stator & magneto housing was oily on bottom. Other than that stator appears ok. Appears crankshaft bearing seal leaking possibly shorting out stator? Is...
  2. P

    In need of ohm resistance specs - '08 summit = no spark

    So I definitely have intermittent. Fire sled up today second pull. Idled for 5-10 mins until I stopped it however instrumentation really messed up. If throttle it up good gauges reset just like on start up. If I let it idle down gauges go wacky again. I also noticed headlights don't illuminate...
  3. P

    In need of ohm resistance specs - '08 summit = no spark

    So for now without the specs, I inspected the famous red/blue wire from the voltage regulator. You could say it was showing signs of wear against the rivet. I taped it up and covered the rivet with foam. Sled fired right up however when I shut it down then try again won't always fire. Sometimes...
  4. P

    In need of ohm resistance specs - '08 summit = no spark

    I'm wondering if anyone can offer up a link for ohm resistance specs for my '08 summit. I need to meter components to see what wrong. Sled ran great until I used kill switch to stop. Bypassed/jumpered kill switch with no luck. Thanks in advance.
Top Bottom