Recent content by Jayste

The bro law had a gas can stolen from the back of his truck in front of his house, the next jug was filled with 2/3 sugar water. It went missing as well, but hasn’t had anything taken for quite a while now!

Kibbles, you already got the Cat guys stirred up with an 880, now working on the Yamaheads with a 867. Got eem!

2-22-19

Any ideas on the new Arctic Cat ad, it’s saying “something big is coming “???

Sea Foam all the way, the only year my fuel went bad, was when I used the Amsoil stabilizer. Grease the zerks and steel wool the exhaust!

I had a bad batch of fuel once, had to drain it and then had to put fuel down the plugs to get it going.

This might be Dotard of the Douchy Club!

Sent from my iPhone using Tapatalk

I thought this was Poo's slogan! Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Welcome to Cat 800's, my '10M8, different buddy 's '12XF, '14M8000 & '09HCR all do it. The HCR did the oil delete and thinks it helped. I'm just used to it now, but have had a couple occasions where it got me into trouble or should I say would of got me out of trouble if it wouldn't of bogged...

I also throw in some hand warmers. Sent from my iPhone using Tapatalk

I figured it out, when I disassembled it, I took the pulley off of the servomotor to make it easier to remove the cables and when I put it together I must of moved the servomotor shaft and it ended up being 180 degrees out. Spun the shaft back 180 on the pulley and everything is good. I wasn't...

So I decided to do the annual power valve cleaning and had to adjust one cable a little bit, put everything back together and now I get an error code 18, which stands for servomotor failure. Tried reving it high but the valves aren't opening and runs crappy. Cables open and close nice by hand...