Recent content by Islanddoo

  1. I

    Silbers 850 turbo kit could be the answer..

    Does anybody know what clutching comes with the kit? Is it just a Helix, Sec spring and pivot bolt weights?
  2. I

    Removable tail flap.

    Yes the punch marks on the 17's are not correct for this install. Refer to instructions for correct Center to Center measurements
  3. I

    Silbers 850 turbo kit could be the answer..

    Did they give you any idea of when they might get the re-flash set up for Ride Whistler? Currently waiting on a kit and would sure be nice to be able to get the ECM flashed locally
  4. I

    G4 DriveShaft.

    Not sure if it's exactly the same but the hydroforming is the same do the drivers would work from all those years
  5. I

    What clicker is everyone riding on

    Got the 850 pretty close today. 3 to 5000 ft clicker3 with 4.1G of additional ramp weight and black skidoo secondary spring 8000 rpm all day! Sent from my iPhone using Tapatalk
  6. I

    Belt issues on the 850

    Rode two solid days in 3' of powder with Black secondary spring at 4 to 5K in altitude, you could touch the clutches after riding for 10 mins! Zero belt dust! Just need to add some weight to primary as it would flare to 8200 then settle around 7900 in clicker 1. I would suggest the black spring...
  7. I

    SLP pipe and can

    I am running the SLP set up on my 15 T3 174 fit and finish where excellent! Sled is very responsive from idle all the way up to WOT. Needs to be clutched properly and run at 8100 to 8200 RPM but holds RPM very well. Comparing it to another stock 174 the belt is running about 1/2" higher in the...
See more
Top Bottom