Recent content by DragonH

To both families: My sincerest condolences to both families. To everyone else: Having been a part of the same riding group as renegade_of_funk, I also witnessed this event. While I agree that this is not the time nor the place to be pointing fingers, there are a few lessons that I've taken from...

You are a dealer for Exit shocks, correct?

I suppose I should get the dynotech subscription to get my answer but does anyone use a PC5 with a stock pipe? Also, I see the PC5 recommended quite often for the IQ but has anyone tried any other controllers (boondocker, attitude, etc) on a stock sled?

Yes, I had to drill a new hole in each rail (3/8" diameter), 5/8" back from the original. very easy to do. took me about an hour by myself to change springs, do the scissor arm relocate, and adjust the limiter strap. I don't have my sled in my garage to show you but if you don't like it, you...

Just an update guys, I e-mailed Curt at fastrax motorsports (read on snowest he was very knowledgable with the IQ suspension). His recommendation was to swap out the stock torsion springs for the 0.375/47deg (i'm about 240# all geared up) as well as move the lower mount for the rear scissor arm...

Has anyone made any modifications to their stock D8 rear suspension? ie. moving components to different mounting holes, etc. I've read a few posts about getting rid of the WE shocks but I just don't understand how changing the shocks can solve what appears to be a suspension geometry issue...

Hey nutma, cool side vents with the dragon optics (???) logo. Where did you get those from?

No I don't have a picture and my sled's in storage in a friend's shop right now. I might be doing some work on it this weekend so I'll try to grab one. Which handheld are you trying to mount?

I've got a Garmin eTrex Legend mounted to my 2009 RMK Dragon. I used a dash mount with the permanent adhesive pad and stuck the mount on the black plastic to the left of my gauge cluster.

Thanks for the reply, just curious, what does the 09 D8 have for stock gearing?

Anyone done any clutching/gearing changes to their '09 D8? Sled is stock except for MBRP can. Considering SLP stage 2 or 3 kit in the future which would come with the appropriate clutch kit but I would like to hear about any changes to a basically stock setup (or post links to other...

Just a comment on the Float 30: I agree that pushing the release date back indicates that they are making sure that the design and operation is the best it can be. Also, BCA's lack of experience in the airbag market (as compared to ABS) doesn't really factor in for me. I believe that BCA has...

Looking for some input - Back in Sept, I had to have the front track shock (Walker Evans) rebuilt and recharged. After I installed it, I noticed that the rolling resistance on the track was very high - to the extent that it takes quite a bit of effort to roll it down the ramp off the trailer...