Recent content by 07grizzly

Rode Allen creek today tracked out, but the snow was falling! Gonna try chappel to mar.

What's the snow conditions. Trying to find snow been hard the last two days!

Slp stage 4 kit works real well!

Took my 2012 apart with 500 miles to do the Slp stage 4 kit and both cylinder skirts had cracks in them. Both cracks were half moon shaped and very hard to see. Slp told me they check all the cylinders off the pros that come in. Lucky enough to get it warranty. Then sent out the brand new...

Only put 65 miles on mine so far but seems to pull harder had to add a lot of weight using 73 grams at 2000 to 2500 ft can't wait to get to the hills.

Check your TPS on the PCV.

Any one else have any feed back on the slp stage 4 kit going to get it this summer and wonder if anyone had any issues?

Do you know if this kit changes the stroke of the engine? Or do the taller pistons keep it the same?

Looking for a yellow injector for a 2010 assault 800cfi. Just wondering if anyone on here might have a used one.

Your TPS might be out of adjustment mine acted like that when it was out.

Ordered my fix kit wednesday should be here today hope it works good. Heading to sicamous sledding on the 24th I think I'll wait tell I get back to put it in!!

Reset the TPS on my PV5 didnt help, did a compression test 130 psi both sides. I took the top end out and the reeds found that the top reeds pedals on both reed cages are chip and cracked.

Thanks for the info i'm gonna try a few things let you guys know what happens.

the sled has slp heads, pipe, highflow intake, boysen rage cages and pcv runing the slp map. I'll have to do a compression test but the motor only has around 250 miles since the new cylinders, pistons, rings.

My sled idle's so low that the headlights and dash light will turn off and on and then it just shuts off. It runs find when I drive it or a give it a lil gas with the throttle but it won't idle on its own. Was wondering if anyone esle has had this problem or might know what is wrong.