Trailers...be careful where you go...

sledbunnyracing · 07-18-2008, 02:17 PM

Here is a clip that was e-mailed to me by a fellow snowandmud member...I think it's priceless.
It's suppose to happen at a ATM drive thru

Clicky Here --- ATM Drive Thru

This should get a few conversations started....lol....

Thanks Rob...

catzuki · 07-18-2008, 05:45 PM

Srupid americana. Some one either had of died or been completely screwed.

Murminator · 07-18-2008, 05:57 PM

Came down in a hurry didn't it

ZRrrr · 07-19-2008, 01:22 AM

Saw a short bit of this on the news a night or two a go. Happened fast so I didn't get a good look. Slowed the vid down and WoW....did they make it out of there alive. Truck looks pretty flat at the end.

medler · 07-19-2008, 04:15 PM

Ouch I bet that was not a fixxer

teeroy · 07-19-2008, 07:00 PM

brutal.....I hope they made it out of that okay, that truck looked like it took a pretty nasty shot from the canopy.

I was right behind a truck pulling a lowbed hauling a skidder AND a feller buncher on one load on the Bald Mountain Tower road south of Grande Prairie, the cutting head of the buncher was on the gooseneck and the skidder behind it when he hit the covered steel bridge with 5.5m clearance. The stick hit the first beam, then went straight up in the air ripping the lift cylinders apart and the stick and cutting head ended up on the cab of the skidder, still attached at the base of the turret. the guy was going fast enough he made it all the way across the bridge, about 25-30 meters, and through the other side. Wish I had the camera that day, there's pictures out there somewhere. a few guys that came along were snapping away.

sledbunnyracing · 07-24-2008, 12:41 AM

Priceless Video...lol...

Sweigh · 07-24-2008, 12:05 PM

There was a father and son in the truck, and the father managed to undo his seatbelt and get to the passanger side as it was coming down.. they both made it out alive.

check the link for more pictures and a brief story.

Shelby County Today

GETR'DONE · 07-24-2008, 12:09 PM

Originally Posted by Sweigh

There was a father and son in the truck, and the father managed to undo his seatbelt and get to the passanger side as it was coming down.. they both made it out alive.

check the link for more pictures and a brief story.

Shelby County Today

The cover must not have been put up very well, can't believe the whole thing came down like that!

Sweigh · 07-24-2008, 12:13 PM

considering his whole unit was nearly brand new, I'm guessing he probably hadn't towed too much before that day...

koby · 07-24-2008, 03:01 PM

That should buff right out.
Good he did not loose hs life over that oppsident

sledbunnyracing · 07-28-2008, 06:16 PM

Good link Sweigh...bet there was a lawsuit after that...but who against who.
The truck cause the top shouldn't have come down that easy or the building cause he was an idiot for hitting it???

07-18-2008, 02:17 PM	#1 (permalink)
sledbunnyracing Senior Moderator Join Date: Oct 2006 Location: Edmonton Alberta, Canada Posts: 6,170 Casino Cash: $2541741 Thanks: 115 Thanked 1,400 Times in 967 Posts	Trailers...be careful where you go... Here is a clip that was e-mailed to me by a fellow snowandmud member...I think it's priceless. It's suppose to happen at a ATM drive thru Clicky Here --- ATM Drive Thru This should get a few conversations started....lol.... Thanks Rob... __________________ www.sledbunnyracing.com 05 Rev 800 01 RMK 800 99 RMK 700 Last edited by sledbunnyracing; 07-18-2008 at 02:43 PM.

07-18-2008, 05:45 PM	#2 (permalink)
catzuki Member Join Date: Nov 2006 Location: Kelliher, Saskatchewan Posts: 441 Casino Cash: $205020 Thanks: 7 Thanked 45 Times in 43 Posts	Re: Trailers...be careful where you go... Srupid americana. Some one either had of died or been completely screwed. __________________ 2007 Ski-Doo Summit XRS-800 R P-TEK 159" W/Nitrous The "THING" can Future mods:::: GOT BOOST 4 STROKE 2006 Kawasaki Brute force 750I 30" Mudlites ITP Moose chip, clutch springs Aluminum skids 48" plow 2003 Dodge 3500 4x4 5.9L CTD W/ 6 Spd 6" Bds Lift with 37x14.00-17 SS Iroks 500+ RWHP and 1000+ FT/LB Torque

07-18-2008, 05:57 PM	#3 (permalink)
Murminator Moderator Join Date: May 2007 Location: NE Edmonton Posts: 1,283 Casino Cash: $710581 Thanks: 91 Thanked 308 Times in 219 Posts	Re: Trailers...be careful where you go... Came down in a hurry didn't it __________________ Murray If my wife asks.....It cost about 20 bucks Don't be offended......I hate everyone equally Wanted Rev Gas Caddy...or just the strap http://media.putfile.com/Outlaw-movie

07-19-2008, 01:22 AM	#4 (permalink)
ZRrrr Member Join Date: Dec 2006 Location: Edmonton Posts: 488 Casino Cash: $209729 Thanks: 56 Thanked 158 Times in 105 Posts	Re: Trailers...be careful where you go... Saw a short bit of this on the news a night or two a go. Happened fast so I didn't get a good look. Slowed the vid down and WoW....did they make it out of there alive. Truck looks pretty flat at the end.

07-19-2008, 04:15 PM	#5 (permalink)
medler Member Join Date: Aug 2007 Location: Airdrie ,Alberta Posts: 178 Casino Cash: $197062 Thanks: 21 Thanked 36 Times in 29 Posts	Re: Trailers...be careful where you go... Ouch I bet that was not a fixxer __________________ 2007 ,700 Grizzly Camo 26'' mudlites ,Full alluminum skid plates ,Yamaha brush Guards....more to come.

Sponsored Links, Plese click on Banner to View there Website

07-19-2008, 07:00 PM	#6 (permalink)
teeroy Member Join Date: Oct 2007 Location: Grimshaw Posts: 588 Casino Cash: $433791 Thanks: 256 Thanked 219 Times in 155 Posts	Re: Trailers...be careful where you go... brutal.....I hope they made it out of that okay, that truck looked like it took a pretty nasty shot from the canopy. I was right behind a truck pulling a lowbed hauling a skidder AND a feller buncher on one load on the Bald Mountain Tower road south of Grande Prairie, the cutting head of the buncher was on the gooseneck and the skidder behind it when he hit the covered steel bridge with 5.5m clearance. The stick hit the first beam, then went straight up in the air ripping the lift cylinders apart and the stick and cutting head ended up on the cab of the skidder, still attached at the base of the turret. the guy was going fast enough he made it all the way across the bridge, about 25-30 meters, and through the other side. Wish I had the camera that day, there's pictures out there somewhere. a few guys that came along were snapping away. __________________ Originally Posted by snotrocket Yaah FLAMES fans aren't the brightest bulbs

07-24-2008, 12:41 AM	#7 (permalink)
sledbunnyracing Senior Moderator Join Date: Oct 2006 Location: Edmonton Alberta, Canada Posts: 6,170 Casino Cash: $2541741 Thanks: 115 Thanked 1,400 Times in 967 Posts	Re: Trailers...be careful where you go... Priceless Video...lol... __________________ www.sledbunnyracing.com 05 Rev 800 01 RMK 800 99 RMK 700

07-24-2008, 12:05 PM	#8 (permalink)
Sweigh Member Join Date: Oct 2007 Location: Edmonton Posts: 149 Casino Cash: $241514 Thanks: 23 Thanked 17 Times in 16 Posts	Re: Trailers...be careful where you go... There was a father and son in the truck, and the father managed to undo his seatbelt and get to the passanger side as it was coming down.. they both made it out alive. check the link for more pictures and a brief story. Shelby County Today __________________ Chad 2001 Honda TRX400EX - Stock 2007 Phazer Mountain Lite - Stock 2008 Can-Am Renegade 800 X - Dalton Clutch, ITP 27" XTR's, 1" spacers in front, Warn XT 1500 (KOVS mount), Overfenders

07-24-2008, 12:09 PM	#9 (permalink)
GETR'DONE Moderator Join Date: Nov 2006 Location: Calgary Posts: 1,784 Casino Cash: $662540 Thanks: 555 Thanked 263 Times in 208 Posts	Re: Trailers...be careful where you go... Originally Posted by Sweigh There was a father and son in the truck, and the father managed to undo his seatbelt and get to the passanger side as it was coming down.. they both made it out alive. check the link for more pictures and a brief story. Shelby County Today The cover must not have been put up very well, can't believe the whole thing came down like that! __________________ *GETR'DONE*

07-24-2008, 12:13 PM	#10 (permalink)
Sweigh Member Join Date: Oct 2007 Location: Edmonton Posts: 149 Casino Cash: $241514 Thanks: 23 Thanked 17 Times in 16 Posts	Re: Trailers...be careful where you go... considering his whole unit was nearly brand new, I'm guessing he probably hadn't towed too much before that day... __________________ Chad 2001 Honda TRX400EX - Stock 2007 Phazer Mountain Lite - Stock 2008 Can-Am Renegade 800 X - Dalton Clutch, ITP 27" XTR's, 1" spacers in front, Warn XT 1500 (KOVS mount), Overfenders

07-24-2008, 03:01 PM	#11 (permalink)
koby Member Join Date: Oct 2007 Location: Saddle Hills, AB Posts: 289 Casino Cash: $151178 Thanks: 91 Thanked 149 Times in 111 Posts	Re: Trailers...be careful where you go... That should buff right out. Good he did not loose hs life over that oppsident

07-28-2008, 06:16 PM	#12 (permalink)
sledbunnyracing Senior Moderator Join Date: Oct 2006 Location: Edmonton Alberta, Canada Posts: 6,170 Casino Cash: $2541741 Thanks: 115 Thanked 1,400 Times in 967 Posts	Re: Trailers...be careful where you go... Good link Sweigh...bet there was a lawsuit after that...but who against who. The truck cause the top shouldn't have come down that easy or the building cause he was an idiot for hitting it??? __________________ www.sledbunnyracing.com 05 Rev 800 01 RMK 800 99 RMK 700

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Everyone that has holiday trailers	albertagal500	TOW VEHICLES, RV's, TRAILERS and ACCESSORIES FOR THEM	16	03-09-2008 11:52 AM
Be careful it can happen to anyone.	OVERKILL 19	JUST ABOUT ANYTHING GOES	12	02-29-2008 07:35 PM
Always be careful	Misfit	JUST ABOUT ANYTHING GOES	2	02-22-2008 11:45 PM
Rental trailers	truckasaurus	TOW VEHICLES, RV's, TRAILERS and ACCESSORIES FOR THEM	4	12-19-2007 11:05 PM
Enclosed Trailers	bananaman	TOW VEHICLES, RV's, TRAILERS and ACCESSORIES FOR THEM	19	03-19-2007 11:40 PM