More Brute Jetting questions

catmando · 07-29-2008, 11:45 PM

Just got my Penland Pro Series Exaust and it never came with jets or any information to rejet it for this pipe.05 650 Brute Force,I know it has to be rejetted and I cant seem to find what I need off the HMF website either.
Can anyone help me?
catmando!

lucm · 07-30-2008, 08:34 AM

Originally Posted by catmando

Just got my Penland Pro Series Exaust and it never came with jets or any information to rejet it for this pipe.05 650 Brute Force,I know it has to be rejetted and I cant seem to find what I need off the HMF website either.
Can anyone help me?
catmando!

Hey Catmando........I've got the same pipe on my '07 Brute Force and it tooks me a while to get the jetting right but it was sure worth it

I'm not sure if you were on this site but I found lots of good info on it when I jetted my quad.

HMF Engineering Forums - Powered by vBulletin

this site also has good info on jetting and anything else you want to know about quads........
Kawasaki

good luck with the jetting .........

catmando · 07-30-2008, 02:37 PM

Can you give me the info on your jet sizes and what else you have done to your quad!
Thanks ,will check out the info you sent !
catrmando!

hogwild · 07-30-2008, 07:36 PM

buy dyno jet kit and follow instructions, except dont use dynojet needles keep your stock onesand use shims

lucm · 07-30-2008, 09:19 PM

Originally Posted by catmando

Can you give me the info on your jet sizes and what else you have done to your quad!
Thanks ,will check out the info you sent !
catrmando!

What Hogwild said above is correct...........I do have the Dynojet kit and used their recommended jet sizes......I can't remember exactly what sizes they were but I remember that they were different for the front and back carbs.....the dynojet kit will say. If you can figure it out give me a pm and I'll dig out the boxes and get the exact sizes that I used.
I also have a k&n filter, moose chip, clutch kit, snorkels, 27" zillas and a few extra scratches and dents caused by driver error

lucm · 07-30-2008, 09:23 PM

Originally Posted by catmando

Can you give me the info on your jet sizes and what else you have done to your quad!
Thanks ,will check out the info you sent !
catrmando!

I forgot to mention................if you scroll down to the bottom of the hmfengineering web page there is a section totally dedicated to jetting which tells you everything you wanted to know.......I learned this the hard way but different manufacturers of jet kits don't use the same numbering system so be careful when reading different posts etc.

catmando · 08-04-2008, 08:40 PM

Thanks for the info,decided to wait untill after the long weekend to mess with it,Let the fun begin!
catmando!

Brute Force Boy · 09-04-2008, 02:57 PM

How'd you make out? How loud is the new pipe?

catmando · 09-04-2008, 03:48 PM

Originally Posted by Brute Force Boy

How'd you make out? How loud is the new pipe?

Very Good,Put a little vid on snow and mud,There is a little rattle in the pipe ,I forgot to replace the spark arrestor,All fixed now and goes great.
catmando!

fersch · 10-30-2008, 10:23 AM

I have a 2008 Brute force 650i .I have a k&n filter on it also a hmf penland pro slip on exhaust and a dyna fs chip.I need to jet it and im not sure what to us for jets?Can anyone out there let me know what to use?

07-29-2008, 11:45 PM	#1 (permalink)
catmando Moderator Join Date: Nov 2006 Location: Edmonton Posts: 2,758 Casino Cash: $1026391 Thanks: 611 Thanked 630 Times in 399 Posts	More Brute Jetting questions Just got my Penland Pro Series Exaust and it never came with jets or any information to rejet it for this pipe.05 650 Brute Force,I know it has to be rejetted and I cant seem to find what I need off the HMF website either. Can anyone help me? catmando! __________________ Arctic Cat Baby!......For The Most Part! 05 900 Kingcat,Boondocker Nitrous Kit,Speedwerx Pipe & Can,V-force Reeds,2.5 camo extreme 162" 03 600 Mountaincat 06 650 Prowler Black Magic Pipe & Chip Kickass Intake 03 450 Kodiac (yamaha) shh! 08 110 Giovanni Mini Hummer! 06 Arctic Cat M5 EFI 05 Kawasaki Brute Force,27"Mudlites,Penland Pro Series Exaust! K&N Air Filter Dont be Sorry,Just dont do it again!

07-30-2008, 08:34 AM	#2 (permalink)
lucm Member Join Date: Apr 2007 Location: Whitecourt Posts: 131 Casino Cash: $2702 Thanks: 10 Thanked 21 Times in 20 Posts	Re: More Brute Jetting questions Originally Posted by catmando Just got my Penland Pro Series Exaust and it never came with jets or any information to rejet it for this pipe.05 650 Brute Force,I know it has to be rejetted and I cant seem to find what I need off the HMF website either. Can anyone help me? catmando! Hey Catmando........I've got the same pipe on my '07 Brute Force and it tooks me a while to get the jetting right but it was sure worth it I'm not sure if you were on this site but I found lots of good info on it when I jetted my quad. HMF Engineering Forums - Powered by vBulletin this site also has good info on jetting and anything else you want to know about quads........ Kawasaki good luck with the jetting ......... __________________ '09 800 Summit XP '05 800 Summit - sons' machine '99 600 Summit - for sale '07 Brute Force 750 - some mod's '05 500 Rubicon Gscape '01 Honda 400ex - son's machine '96 500 sportsman

07-30-2008, 02:37 PM	#3 (permalink)
catmando Moderator Join Date: Nov 2006 Location: Edmonton Posts: 2,758 Casino Cash: $1026391 Thanks: 611 Thanked 630 Times in 399 Posts	Re: More Brute Jetting questions Can you give me the info on your jet sizes and what else you have done to your quad! Thanks ,will check out the info you sent ! catrmando! __________________ Arctic Cat Baby!......For The Most Part! 05 900 Kingcat,Boondocker Nitrous Kit,Speedwerx Pipe & Can,V-force Reeds,2.5 camo extreme 162" 03 600 Mountaincat 06 650 Prowler Black Magic Pipe & Chip Kickass Intake 03 450 Kodiac (yamaha) shh! 08 110 Giovanni Mini Hummer! 06 Arctic Cat M5 EFI 05 Kawasaki Brute Force,27"Mudlites,Penland Pro Series Exaust! K&N Air Filter Dont be Sorry,Just dont do it again!

07-30-2008, 07:36 PM	#4 (permalink)
hogwild Member Join Date: Mar 2007 Location: bassano, ab Posts: 21 Casino Cash: $44700 Thanks: 0 Thanked 2 Times in 2 Posts	Re: More Brute Jetting questions buy dyno jet kit and follow instructions, except dont use dynojet needles keep your stock onesand use shims

07-30-2008, 09:19 PM	#5 (permalink)
lucm Member Join Date: Apr 2007 Location: Whitecourt Posts: 131 Casino Cash: $2702 Thanks: 10 Thanked 21 Times in 20 Posts	Re: More Brute Jetting questions Originally Posted by catmando Can you give me the info on your jet sizes and what else you have done to your quad! Thanks ,will check out the info you sent ! catrmando! What Hogwild said above is correct...........I do have the Dynojet kit and used their recommended jet sizes......I can't remember exactly what sizes they were but I remember that they were different for the front and back carbs.....the dynojet kit will say. If you can figure it out give me a pm and I'll dig out the boxes and get the exact sizes that I used. I also have a k&n filter, moose chip, clutch kit, snorkels, 27" zillas and a few extra scratches and dents caused by driver error __________________ '09 800 Summit XP '05 800 Summit - sons' machine '99 600 Summit - for sale '07 Brute Force 750 - some mod's '05 500 Rubicon Gscape '01 Honda 400ex - son's machine '96 500 sportsman

Sponsored Links, Plese click on Banner to View there Website

07-30-2008, 09:23 PM	#6 (permalink)
lucm Member Join Date: Apr 2007 Location: Whitecourt Posts: 131 Casino Cash: $2702 Thanks: 10 Thanked 21 Times in 20 Posts	Re: More Brute Jetting questions Originally Posted by catmando Can you give me the info on your jet sizes and what else you have done to your quad! Thanks ,will check out the info you sent ! catrmando! I forgot to mention................if you scroll down to the bottom of the hmfengineering web page there is a section totally dedicated to jetting which tells you everything you wanted to know.......I learned this the hard way but different manufacturers of jet kits don't use the same numbering system so be careful when reading different posts etc. __________________ '09 800 Summit XP '05 800 Summit - sons' machine '99 600 Summit - for sale '07 Brute Force 750 - some mod's '05 500 Rubicon Gscape '01 Honda 400ex - son's machine '96 500 sportsman

08-04-2008, 08:40 PM	#7 (permalink)
catmando Moderator Join Date: Nov 2006 Location: Edmonton Posts: 2,758 Casino Cash: $1026391 Thanks: 611 Thanked 630 Times in 399 Posts	Re: More Brute Jetting questions Thanks for the info,decided to wait untill after the long weekend to mess with it,Let the fun begin! catmando! __________________ Arctic Cat Baby!......For The Most Part! 05 900 Kingcat,Boondocker Nitrous Kit,Speedwerx Pipe & Can,V-force Reeds,2.5 camo extreme 162" 03 600 Mountaincat 06 650 Prowler Black Magic Pipe & Chip Kickass Intake 03 450 Kodiac (yamaha) shh! 08 110 Giovanni Mini Hummer! 06 Arctic Cat M5 EFI 05 Kawasaki Brute Force,27"Mudlites,Penland Pro Series Exaust! K&N Air Filter Dont be Sorry,Just dont do it again!

09-04-2008, 02:57 PM	#8 (permalink)
Brute Force Boy Member Join Date: May 2007 Location: Peace River, AB. Canada Posts: 139 Casino Cash: $163445 Thanks: 2 Thanked 15 Times in 15 Posts	Re: More Brute Jetting questions How'd you make out? How loud is the new pipe? __________________ 2007 Kawasaki Brute Force 650i

09-04-2008, 03:48 PM	#9 (permalink)
catmando Moderator Join Date: Nov 2006 Location: Edmonton Posts: 2,758 Casino Cash: $1026391 Thanks: 611 Thanked 630 Times in 399 Posts	Re: More Brute Jetting questions Originally Posted by Brute Force Boy How'd you make out? How loud is the new pipe? Very Good,Put a little vid on snow and mud,There is a little rattle in the pipe ,I forgot to replace the spark arrestor,All fixed now and goes great. catmando! __________________ Arctic Cat Baby!......For The Most Part! 05 900 Kingcat,Boondocker Nitrous Kit,Speedwerx Pipe & Can,V-force Reeds,2.5 camo extreme 162" 03 600 Mountaincat 06 650 Prowler Black Magic Pipe & Chip Kickass Intake 03 450 Kodiac (yamaha) shh! 08 110 Giovanni Mini Hummer! 06 Arctic Cat M5 EFI 05 Kawasaki Brute Force,27"Mudlites,Penland Pro Series Exaust! K&N Air Filter Dont be Sorry,Just dont do it again!

10-30-2008, 10:23 AM	#10 (permalink)
fersch Member Join Date: Oct 2008 Location: Drayton Valley , ab Posts: 4 Casino Cash: $13700 Thanks: 0 Thanked 0 Times in 0 Posts	Re: More Brute Jetting questions I have a 2008 Brute force 650i .I have a k&n filter on it also a hmf penland pro slip on exhaust and a dyna fs chip.I need to jet it and im not sure what to us for jets?Can anyone out there let me know what to use?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kelowna (westside) snowmobiling questions	Denwa	OKANAGAN/SHUSWAP SNOWMOBILING	7	11-27-2008 08:04 PM
Jetting a snorkeled brute force	Brute Force Boy	ATV & DIRT BIKE PERFORMANCE and MODIFICATION GARAGE	5	09-04-2008 02:54 PM
jetting questions	Kurte247	DIRT BIKES	6	08-01-2008 03:36 PM
Questions for FORD DIESEL OWNERS	Culvert	TOW VEHICLES, RV's, TRAILERS and ACCESSORIES FOR THEM	44	03-21-2008 03:17 PM
Summit 1000 questions	dieselmech_22	PERFORMANCE and MODIFICATION GARAGE	13	01-25-2008 08:41 AM